1. Chamfer the top corners and nail on with 1-1/2in ovals, punched in and filled.

2. A graduated chamfer can convert a linear element into a vector, having magnitude and direction.

3. Drag to add perpendicular lines with adjustable chamfer size.

4. What is the nominal chamfer size?

5. Chamfer the piston ring slightly.

6. Can wine chamfer bazoo cure?

7. Circuit card is loaded very easily inside chamfer of place plug - in unit [Sentencedict], kadouke updates major circuit.

8. The so - called bearing chamfer , that is, the horizontal and vertical bearing surface of the junction.

9. The part of gradient coil near shell forms chamfer angle to lay more sound absorption material.

10. The result indicates that the chamfer angle and the inclusion are the main reason for the fatigue fracture.

11. Because concave and convex chamfer is occlusive not close together, the meeting after the floor uses period of time causes degum, aperture appears on the floor.

12. And the composition that chamfer pledges stimulative cutin is contained to flake inside face film, come through dissolving purify is corneous .

13. Single angle drills: Use machine chamfer for hole of glass(), stones etc. Various type and specification.

14. Gingival margins can be prepared with a deep chamfer or a shoulder.

15. Single type angle drills: Use machine chamfer for hole of glass, stones etc.

16. The method with curt attrition simple chamfer has been maintained to be can damage skin, better idea is to use the product that contains oil, make corneous layer natural bate.

17. When it comes to the monospaced chamfer at intersection line of orthogonal cylinder and cylindrical bore, however, no mature manufacturing method has been found yet.

18. Its large base is deep chamfer, radiative model old decorative pattern, have skid resistance can.

19. Installation of thin film solar production lines including CVD, PVD, Laser scriber, chamfer , cleaning machine, laminator and conveyer etc.

20. Drag onto the page. Right - click to set chamfer angle.

21. If the I. D. of connecting pipe or equipment is smaller than Schedule 80, it will be necessary to chamfer the inside edge to avoid interference with the rotating butterfly disk.

22. The dimensions of the snap ring groove and of the chamfer adjacent to the groove (fig 20) are in accordance with ISO 464:1995, which also specifies suitable snap ring dimensions.

23. And it also point out that the angle of chamfer and the accuracy design of chamfer start bit are very important to the whole design.

24. Subsequently this thesis narrated in detailed the method that sketched the axis main body and the keyway and created the features of revolve, chamfer and extrude.

25. Table 1 – Accepted deiation for linear measurement except for chamfer edges.

26. The hot crack can be eliminated by properly adjusting chemical composition of the Mg alloy, enlarging chamfer size in hot crack position and altering processing parameters.

27. After seaming, oppress 5 minutes, if bleed to still keep stopping, applied isinglass sponge, hemostatic pink put tooth chamfer check, bite gauze to coil again oppressive and hemostatic.

28. Chamfered washer or spacer with adjustable inside and outside diameters and chamfer.

29. In order to miniaturize the millimeter wave circuit system, this study improved the traditional chain SIW filter and brought forward a new type of compact configuration with chamfer angle.