1. Therefore, the inductor is certainly hygric.

2. WARNING: Never transmit while changing the INDUCTOR switch.

3. Chip Ceramic Capacitors, Chip Inductor, Ferrite Bead.

4. KB supply adjustable inductor. adjustable coil. Medium weeks.

5. The so-called iron-core inductor, inductance refers to media for the electrical circuit components of soft iron, steel and other iron core inductor coil media.

6. Some optimization designs were made with the on-chip inductor and the RF switches to get the maximum Q-value.

7. A capacitor at high frequency acts like an inductor and resistor in series combination with the capacitor plates.

8. CHIP INDUCTOR, CHIP BEAD , SMD POWER INDUCTOR . COILS, TRANSFORMER.

9. An inductor alternator is a special kind of synchronous generator in which Both the field and the output winding are on the stator.

10. The introduction of PFC inductor current critical continuous mode Boost converter, DC/DC-level model using quasi-resonant flyback converters.

11. In a word, during using the diathermanous inductor, it must be observed as well as checked.

12. A novel spiral inductor resonator bandpass filter based on LTCC is proposed in this paper.

13. The invention discloses a mutual inductor assembly tooling, and in particular relates to a disassembling tooling of a secondary patch board of a mutual inductor.

14. Deduction shows that a series inductor can be applied as the inter-stage matching network between the two stages.

15. Here, the generator armature inductor is used as the boost inductor with the average current control method.

16. One winding wi adjustable inductance. Adjustable mutual inductor can be specified.

17. The resistance of an inductor is so small that it is negligible.

18. Sometimes, a diode across the inductor may settle down the oscillations by reducing the inductive kick.

19. Power cabinet can be placed beside the inductor, properly adjust the position to operate conveniently, but the separation distance should be short as much as possible.

20. SMT power inductor formed by directly connected electrode on ferrite core.

21. Furthermore, the required low series resistance results in high Q resonances with the inductors at audio frequencies.

21.

22. In order to ensure the working life of the furnace lining, the new inductor put on production must roast with low power, 2 hours later can it be produced with high power.

23. In respect of induction heating, a magnetizer will considerably heighten both heating efficiency of inductor and heat treatment quality of part so as to save energy.

24. And he found something missing: a fourth basic circuit element besides the standard trio of resistor, capacitor and inductor.

25. Based on the method of source transfer, this paper discusses the decoupling inductor. The Method can easily present a decoupling circuit and give the usable conditions of the decoupling inductor.

26. During full load running of inverter, the inductive current RMS value and the peak current are two important parameters for designing the inductor of the output LC filter.

27. It helps in analysis to scribble on the schematic a resistor in series with the inductor or transformer whose value is the winding resistance.

28. This paper introduced the development of induction heating power source, induction hardening machine, inductor and new technology in worldwide up to date.

29. The AVR performs this function by controlling the duration of the current through the inductor on each half cycle via the thyristors.

30. An active-clamping branch composed of an auxiliary switch and a clamping capacitor is added in parallel with the resonant inductor.

31. The harmonic characteristics of a rectifier with a DC filter inductor or capacitor are analyzed and then relevantlythey are classified into current type and voltage type harmonic source.

32. Finally, we study a simple method of decoupling equivalent for some circuits containing complex coupling inductor.

33. Control of the thyristor firing angle dictates the moment in which the inductor is inserted in the circuit.

34. A new design of magnetic control type motor soft starter is provided, which makes the controllable inductor connect with the stator of motor in series.

35. The design, simulation and optimization of on - chip inductor are studied.

36. Inductor is the important elements in electronic circuit design, widely used in filters, band-pass amplifiers and other high-frequency compensation circuit.

37. Can be surface - mounted and reel packingDesigned for high performance main transformer pulse transformer and inductor.

38. The furnace lining of diathermanous inductor adopts entirely knot type.

39. The conclusion can be applied on the deduction of equivalent circuit of inductor with initial current.

40. Magnetoelectricity separation collection technique is adopted, because it is very difficult to seal, orientate and level the magnetic inductor which used to measure seabed magnetic field.

41. The SEPIC converter has the advantages of a continuous input current due to the input inductor and positive output voltage.

42. Through inductor optimization, the VCO has a low phase noise and a wide tuning range with switched capacitor array and NMOS varactor.

43. A third-order intermodulation distortion(IMD3) sinker composed of a PMOS FET and a tuned inductor is proposed for linearization of CMOS cascode LNA in this paper.

44. Therefore, the electro static signals can be transmitted to an earth terminal by the inductor in electro static events.

45. This thesis puts forward a new kind of method of inductor fabrication, whose internal down-lead adopts ohm contact formed by the boron heavily doped region and the Au evaporated.

46. The effects of the LC filter on the motor voltage and inverter output current were analyzed. A parameter design method was developed for the inductor and capacitor designs.

47. At last , the measurement error with mutual inductor is analyzed.

48. The main circuit includes parallel fixed compensating capacitor, variable compensating inductor and IGBT, etc.

49. Litz wire inductors provide unique capabilities for your company's high frequency, limited space, inductor applications.

50. Properties and preparing process of tri layer films with Ag base coating, Ni electrodeposit, Sn Pb alloy for terminal electrode of multilayer chip inductor were described.

51. Memory IC , Chip Ceramic Capacitors, Inductor, Chip Tantalum Capacitors,() Ferrite Bead.

52. The active inductor configuration is exploited to realize the shunt peaking technique in order to achieve a broader bandwidth.

53. This, we're told, is a seperate Inductor for the Memory Controller of the CPU.

54. An inductive heating device (20) is disclosed having a power supply (22), an inductive coupling assembly (30), and an inductor core (38).

55. The circuit consists of an inductor, capacitor and a memory - resistor, or memristor.

56. The heating inductor and high efficiency pressure air cooling devices for the rail were manufactured.

57. Chip Ceramic Capacitor, Inductor, Ceramic Filter, Ceramic Resonator, Ferrite Bead, Ferrite Core , Transformer.

58. With the developing of perpendicular recording media, GMR magnetic head and thin film wireless inductor cores, high cut-off frequency is required for the soft magnetic films.

59. Planar spiral inductor is the most important passive component of CMOS RF integrated circuit design.

60. All these have put forward the demand for digitization of the mutual inductor.

61. A 1 V, 2.5 GHz VCO is designed with an on - chip inductor.

62. The system is composed of computer, microwave R/W, electric-contact driven inductor, ground inductor, snapshot unit, overload recognizer, database and transmitting subsystem.

63. The operation principle of magnetic amplifier (Mag Amp) regulator is described and the design method of the controling inductor in the MagAmp regulator is derived.

64. The utility model uses the zinc bloom pressure-sensitive power resistor in the low potential gradient and is very easy to match with the characteristic of the voltage mutual inductor.

65. With piezoelectric crystal inductor, the sensitivity of stopping or missing pick is so high that instant stopping can be effected.

66. A method for calculating the self inductance and distributed capacitance of the spiral inductor is described.

67. Devices model including: NMOS FET, Resister, Capacitance, Inductor. Device model is analyzed deeply according to the RF Spice file of SMIC.

68. This thesis analyzes the zero-crossing distortion, and points out that the major causes are the inductor and the phase displacement between the input current and the input voltage.

69. Above 2 years design experience in RF filter, inductor, diplexer , balun transformer, combiner, splitter, directional coupler and other similar devices.

70. By integrating the main transformer and output inductor with magnetics integration technique, an ACFC with high efficiency and high power density was obtained.

71. An inductor layout and a manufacturing method thereof are provided.

72. This system consists of DC standard voltage source, zero magnetic flow current mutual inductor , transconductance amplifier, current divider, standard resistance and digital voltmeter.

73. The influence factors of input current distortion rate , such as : the values of inductor, hySteresis hod.

74. Inductor element is great important as a part of a circuit in many frequency selective circuits and telecommunications equipments.

75. The equivalent impedances of inductor and capacitor in transient response were deduced from the exponential transient solution and the volt ampere relation of these elements.

76. A distributed capacitance model for monolithic inductors is developed to predict the equivalently parasitical capacitances of the inductor.

77. The auxiliary circuit is composed of an auxiliary switch, a coupled inductor(flyback transformer) and a feedback diode.

78. When powder core is used to preparation of APFC inductor, lower core loss will be obtained as long as core sizes and coil turns are properly selected.

79. A variable inductor used to measure variations in terrestrial magnetism.

80. Now the switching frequency of the DC-DC converters is increased to reduce the required inductance, but the large off-chip power inductor still dominates the PCB area.

81. Represents an inductor. Inductor core and adjustability can be specified.

81. Wish you will love and make progress everyday!

82. To reduce the inductor and the phase displacement between the input current and the input voltage simultaneously, Multi-level (ML) converters are adopted as the PFC topologies in this thesis.

83. Drag onto the page, then right - click to specify inductor core and adjustability.

84. Active inductor loads and direct-coupled technology are employed to increase the gain, broaden the bandwidth, reduce the power dissipation, and keep a tolerable noise performance.

85. One winding wi adjustable inductance . Right click for adjustable mutual inductor.

86. It is shown that the metal thickness effect on the Q-factor depends on the diameter of the innermost turn in a planar spiral inductor.

87. Adjust the INDUCTOR control for lowest deflection on the reflected power.

88. A decoupling integrated magnetic component is designed on base of the method of counteracting coupling among windings, which integrates a low power transformer and an inductor together.

89. According to requirement of the product and consideration of the application of saturable inductor, the suppression function of diode reverse recovery current existing in PFC stage is emphasized.

90. It is because of the existence of the nonlinear inductor that the instantaneous working state of the welding transformer is hardly to be analyzed with classical electrotechnical theory.

91. For convenience of homopolar inductor alternator's control, the mathematics model of homopolar inductor alternator was established, and the calculation of inductance parameter was given.

92. The main work of this paper is the electromagnetism design of homopolar inductor alternator and its performance analysis.

93. The method of vehicle peccancy surveillance is usually achieved through inductor buried in the ground or axle sensor.

94. The inductor stray capacitance is calculated by ANSYS. The test result is simulated and analyzed.

95. DC power supply cabinet: three-phase silicon-controlled rectifier (SCR), computer digital pulse triggers plate, flat-wave inductor, L, C filter, etc.

96. The effective inductor, Q-factor and the self-resonant frequency are extracted from S-parameters.

97. TIG welding power source made from SCR and bifilar winding energy saving inductor is introduced in this paper.

98. Diathermanous furnace inductor, is also know as through-type inductor, it is long or short according to the length of heating workpiece and the diameter of the workpiece.

99. The inductor layout comprises a base and a conductive path.

100. A shunt reactor is an inductor that is connected line to ground.

101. Basic passive device integration regions include capacitor, resistor and inductor layers.

102. Mobile Phone Battery Charger, Adaptor, Transformer, Inductor, Ferrite Core, etc.