1. Sanding is unnecessary if the repair is reasonably smooth.

2. The sanding action on all the surfaces we tested was excellent.

3. If it does need sanding, get this done and then give the scrub and wash treatment.

4. Such a large sanding area and variable speed are luxuries that many hone improvers may find unnecessary.

5. The Unabomber, carefully sanding down his wooden bomb covers, would have been untouched by it.

6. The company says it should make sanding three or four times faster than conventional methods.

7. These consist of a motor-driven continuous sanding belt, held against the work by a metal plate under the body.

8. When sanding take care not to round the sharp edges.

8. try its best to collect and build good sentences.

9. This air grinder is used for burr clearing, sanding, polishing, roll scale thining and welding in working ship, chemical machinery, mechanism manufacture repairing and working and so on.

10. We want to buy Sanding Wheels, Abrasive Wheels, Flap Wheels, Convolute Wheels, Polyurethane Wheels, Buffing Wheels, Polishing Wheels, Finishing Wheels.

11. By sanding the split leather surface to roughen it up.

12. After sanding and dyeing, the polyester fabric is treated with anti - UV , flame - retarding and silver powder coating.

13. So it is very necessary to enhance research sanding due to rock destroyed around shot hole.

14. The structure composition of sanding machine was introduced. The main factors affecting sanding effect and reasons of common defects were analyzed, and solutions were also presented.

15. Sanding Wheels Abrasive Wheels , Flap Wheels, Convolute Wheels, Polyurethane Wheels, Buffing Wheels, Polishing Wheels, Finishing Wheels.

16. This air grinder is used for burr clearing, sanding, polishing, roll scale thinning and welding in working ship, chemical machinery, and mechanism manufacture repairing and working and so on.

17. Ma inly used for sanding the products such as black metals, nonmetals materials, wood and - made board.

18. Applied for thickness calibrating . sanding and surface polishing of sound wood, composite flooring . chipboard and veneer.

19. A second application of filler may be required to fill cavities which sanding reveals.

20. You can do this by hand with abrasive paper and a sanding block.

21. It is a light-weight, yet incredibly powerful machine which offers finger-tip control and over 12,000 sanding orbits per minute.

22. Again do not round over the sharp edges when sanding.

23. Again, let the surface dry and finish off with two coats of polyurethane and wax as for the straight sanding process.

24. The cue maker then carefully chooses and seasons the wood, before tapering and sanding it down on a lathe.

25. Oil motor drive with advanced feeding system provides the excellent sanding quality for thd customers.

26. Removal of loose rust, loose mill scale and loose paint by power tool chipping, decaling, sanding, wire brushing and grinding to a specified degree.

27. The superior prescription of the putty is defined by orthogonal test, and its properties can be parallel to the counterpart in Japan except its worse sanding property.

28. Abrasive polishing tools: T-shaped carved mill, engraved mill, grinding wheel machine, Eucampia wheel machines, sanding machines, polishing machine, water mill.

29. Orange peel can often be removed by wet - sanding or machine polishing.

30. He sometimes fills any holes or cracks with a mixture of epoxy glue, sanding dust, and brown paint.

31. The ball was caught by a fielder sanding just inside the boundary.

32. In order to produce dry sanding paper applied to soft materials, the slurry coating was prepared by smearing unblocked materials according to the phase change principle of endothermal agents.

33. Ma inly used for sanding the products such as black metals , nonmetals materials, wood and man-made board.

34. These unsaturated polyesters provide an excellent sanding foundation for further finishing steps.

35. Sanding is a phenomenon that stratum sands come out with formation fluid.