1. The pipes froze because the cladding had fallen off.

2. The old cladding can be easily removed using a claw hammer.

3. Steelwork and the cladding followed in quick succession.

4. Absorbent wall cladding can sometimes present problems.

5. They are to be used outside under cladding.

6. But this decision affected more than the cladding: it also forced certain changes in the structural-steel layout.

7. There was a similar crisis over the biphasic cladding for D.W.'s docker.

8. Cladding for the concrete structure is once again in tune with the surrounding area.

9. The image of cladding, although apt, exaggerates the volume of the gases.

10. Timber cladding also requires the householder to perform regular maintenance, as described above.

11. Floodlighting reflected from the silvery burnt umber cladding of the walls as though ice-ghosts danced there, and set the green columns aglow.

12. Large deflections can help to loosen non-structural cladding and shake up the building's contents like dice in a box.

13. The biggest enemy of timber cladding - and its supporting battens - is rot.

14. They are essential atmospheric cladding which prevents the earth from becoming a frozen planet.

15. Between these are fixed precast concrete external cladding panels.

16. Metal cladding high rate of weld forming, welding deformation small.

17. The maximum hardness of the cladding is HV0.21000, and appears graded distribution.

18. In which the criterion of good roll cladding is given.

19. The two projects deal with masonry diaphragm wall construction and off-the-frame clay brickwork cladding to framed construction.

20. Later developments, however, have produced greatly improved versions of this type of cladding.

21. Another feature will be single wall construction, using a simple timber cladding without a brick facing.

22. The exterior of the whole building itself is also about to receive new cladding which will smarten up its slightly dilapidated appearance.

23. The steel racking is used to support wall and roof cladding and is an integral part of the system.

24. Particular interests lie in masonry structures, light-weight steel building systems, cladding, energy management and auditing, and energy awareness.

24. try its best to collect and build good sentences.

25. Some concrete and clay plain tiles originally intended for roofing can also be used for cladding walls.

26. Fixing shingles Because of the little maintenance they require I intend using shingles rather than timber cladding.

27. Aluminium cleaners: There is a wide range of products formulated specifically for cleaning aluminium cladding and vehicle bodies.

28. The influence of laser power, scanning speed, powder feed rate, spot diameter and preheating on the temperature of molten pool were revealed in the process of single-pass cladding.

29. The Precipitator of Fluid Film Type is developed for the determination of fuel element cladding failure of water-cooled reactor.

30. Copper sheet is a kind of highly stable roofing and facade cladding material, requiring few maintenance. Copper sheets are environmental, safe, easy to be processed and highly corrosion-resistant.

31. The linear and nonlinear analysis models for wind-induced response of glass cladding are established by using plate theory.

32. In this paper, the effect of different laser cladding parameters and different rare earth contents on cracking susceptibility of aviation blade with casting defect cladded by laser was studied.

33. Black circles form interlinking patterns when the louvres are closed - the translucent cladding bringing a glowing quality to the natural daylight filtering through to the interior spaces.

34. At the same time, the characteristics of the LPG temperature sensing about different cladding calorescence coefficient or grating period are showed.

35. With laser cladding Co-base alloy coatings, the high temperature hardness and thermal fatigue resistance of H13 hot-working die surface were appreciably increased.

36. Excessive deflection in a structure may cause considerable damage to cladding.

37. From the outset this project was always going to be technically challenging as it was highly innovative in terms of both the cladding and internal fit out.

38. According to the mathematical model and the temperature field, discussed the energy redistribution when parameters of cladding changed in order to provide references for the work in the future.

39. Resistance value : when resistance value to cladding material by accurate galvanometer.

40. To introduce Al cladding steel wire which is a kind of good conducting wire applied to electric cable and communication extensively and so on internationally at present.

41. Laser cladding bronze alloy process on the surface of nodular cast iron was studied.

42. Somewhat higher spot-welding currents are needed than are used for unclad steel because of the low electrical resistance of the aluminum cladding.

43. Klang Is the sound of a band cladding themselves for the future in wry, possibly deeply important tones.

44. In the cladding while counting in the phase change, using the transverse shift and the phase change of the total reflected light, we derive the beat length formula of the isotrope fiber.

45. Through successful leakage stoppage and cladding of a new compensator, it realized on-line overhaul of a gas main pipe network of the large coke oven.

46. Latest progress and research status of laser cladding ceramic coating was summarized.

47. The optical fiber cladding serves as an important part of the fiber connector, an optical passive component of the greatest demand in optical communications field.

48. The Precipitator of Fluid Film Type is developed for the determination of fuel el:ment cladding failure of water-cooled reactor.

49. These methods contribute to understand irradiation behavior of fuel, cladding and structure components and supply proof for increasing burnup.

50. Bimetal copper - cladding aluminum bars with different transition layers were manufactured by continuous casting.

51. Compared with core glass, the effect of optical processing quality of cladding glass on interface defects was more evident when its viscosity at drawing temperature was higher tha.

52. Surface fluorination, the new technics of POF cladding, was probed in this paper.

53. It is shown that the photosensitivity in chalcogenide fiber cladding leads to the shift of the dip wavelength in LPG, which should not be omitted.

54. The effects of the optical beam width and cladding on imaging are analysed.

55. Using high power CO 2 laser a Ni - Cr - Al plasma coating on aluminum alloy surface a cladding layer.

56. The capper comes equipped with an elevator cap feeder and with 304 stainless steel cladding as standard.

57. This is essentially a cylindrical dielectric waveguide with the scattering matter distributed in the interface of the core and the cladding with different density and depth at different position.

58. Plastic extrusion cladding corrosion protection outer - layer coating production line for tubes.

59. Spot check of surfaces preservation and protection systems ( sandblasting, painting , cladding, etc ).

60. A hollow core and cobweb - structured cladding Bragg fiber that supports circular - polarization - maintaining single - mode is presented.

61. The general design of continuous casting for roll cladding is got.

62. SOM accomplished this by cladding much of the exterior with a blue stone that closely resembles the Potomac stone used in the original 1909 buildings.

63. The relation between the inner cladding layer's thickness and the quality factor of vertical beam is analyzed.

64. The roll cladding processes for copper and aluminum sheet are studied systematically together with the technological conditions for achieving the highest cladding strengths in different processes.

65. The conventional effective index method can only simulate the photonic crystal fibers with single cladding structure.

66. The cladding region has another constant index of refraction called n.

67. As a light water nuclear reactor fuel cladding material, Zr alloy has been wide used and its application experience accumulated, hence it is the potential materials for SCWR.

68. In order to calculate the equivalent step index of the periodic structure of the cladding holey optical fiber, all-vectorial fundamental space filling mode approach was utilized.

69. Results show that directional solidification cladding layers of 316L stainless steel with fine crystallography orientation under the processing parameters mentioned in this paper were obtained.

70. The composite bar, transversal longitudinal section and interface of copper cladding aluminum are analyzed.

71. We proposed fabricating polymer segmented cladding fiber by bicomponent spinning is proposed.

72. The method to select the machining allowance of laser cladding was formulated.

73. Inversion casting technology is a new way for making cladding materials which have characteristics of high efficiency, low consumption and short technological process.

74. The laser - cladding techique for welding of and large workpieces is reported.

75. The exterior horizontal , open - jointed cedar batten cladding, which further emphasises the geometry of the building.

76. In order to reveal the relationship between blue-violet light signal and the surface quality in cladding process, the blue-violet light signal intensity was measured in real time with a UV-420 device.

77. Thermal barrier coatings had been prepared by laser cladding method.

78. Research progress of nano-ceramic coatings prepared by laser cladding is reviewed in brief.

79. The waveguide is preferably in the form of an optical fiber having a cladding that contains a photonic band gap structure which in turn envelopes a light conducting, hollow core portion.

80. Based on the production of copper clad steel wire, the characteristic of inversion casting is introduced, and the rule of parameter influencing cladding specific value systematically value studied.

81. Fiber-Optic Cable A transmission medium composed of a central glass optical fiber cable surrounded by cladding and an outer protective sheath.

82. Guangzhou Metro station has used enamelware steel cladding panel systems decoration panel for it wall.

83. With SM-28 single mode fiber as the leading fibers, depth of modulation (DM) and coupling efficiency (CE) are calculated with relation to core radius and refractive index of core and inner cladding.

84. A unique cladding powder material to harden corrugating rollers surface was developed to tackle the severe dry friction abrasive wear.

84. Wish you can benefit from our online sentence dictionary and make progress day by day!

85. Cermet cladding material is a new kind of material with high wear resistance, which is qualitatively and quantitatively studied by many researchers.

86. Resistance ─ heated Welding technology and equipment for cladding pipes are introduced.

87. A novel double - cladding erbium - ytterbium co - doped fiber amplifier ( EYCDFA ) based on phosphate glass fiber is proposed.

88. By laser cladding, the sealing face of the in outlet valve parts in methylamine pump in urea production line has been strengthened.

89. A backward - pumped large - mode - area ytterbium - doped double - cladding fiber amplifier with the highest output power of 1.

90. The diffusion of carbon in hot working process of cladding sheet is analyzed based on diffusion theory and variations of carbon concentration in the high-speed steel matrix.

91. The protective atmosphere is very important during laser cladding process.

92. Launch scratch test indicate under most big load function of 100N, cladding layer combine substrate well, there are no stripping and avalanche phenomenon.

93. The bioceramic coating by laser cladding has high bonding strength and e.

94. Recycled materials include aluminium cladding, cotton insulation and steel with recycled content.

95. With the measuring system equipped with a microchip solid laser and a unique refractive index matching cladding mode filter, the transmission loss of a double clad fiber laser was measured.

96. The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.

97. It is shown by comparison of properties of various conducting wires that Al cladding steel wire have good properties in respects of corrosion resistance, conductibility , tensile strength and etc.

98. A calculation model is proposed for explosive cladding of steel billet.

99. Though the lasers with lattice-mismatch cladding layers still have low threshold current density, the gain is too small to support ground state lasing .

100. The process makes stainless steel cladding very thin to reduce material cost.

101. Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.

102. The processing and properties of copper-clad steel wire produced by pipe - weld cladding technique were studied.

103. Graphic form the building cladding folk paper - cut art from Poland.

104. The deposited ferritic weld metal shall not contact the austenitic or high - chromium steel cladding.

105. Laser refabrication is a kind of new green reconstruction technology that based on laser cladding.

106. The failed fuel assembly identification system is an important safety system which ensures safe operations of reactor and immediate treatment of failed fuel rod cladding.

107. This paper has some significance for the study of laser cladding bioceramic coatings.

108. Pressurized water reactor fuel performance problems connected with fuel cladding corrosion processes.

109. It aims to realize the laser quenching and cladding for the principle axis and crank of single or more crank while the crankshaft is laid horizontally and rotating around the principal axis.

110. M5 alloy was a new zirconium alloy used in high burn up assembly such as fuel cladding, end plug, guide tube and grid spring and so on.

111. In this paper are introduced and discussed the ways and study results of metallizing cladding onto diamond to raise diamond tool's working effect.

112. So far the first barrier, which is the fuel cladding, has apparently failed[/cladding.html], because they are detecting cesium.

113. Computers were connected to the Ethernet cable through "taps, " where a hole is punched through the coax cladding and the outer conductor so a connection can be made to the inner conductor.

114. The paper finds that the fatigue life of laser cladding submit the logarithmic normal distribution.

115. Zirconium-base alloys are used primarily as fuel cladding material and other core structure material in water cooled nuclear power reactors.