1. The surface is comparable with cast epoxy resins for chemical and stain resistance, whilst offering the mechanical qualities of solid phenolics.

2. Polyester film, inductive, epoxy resin coating.

3. The so described water-base epoxy resin coating is a two-components coating with epoxy resin as the main component, modified polyamide as curing agent and water as dispersion medium.

4. Epoxy resin composition, method for forming conductive film, method for forming conductive pattern and method for manufacturing multilayered wiring board.

5. The sample brominated epoxy resin enclosed in filter paper is burned in flask filling with oxygen.

6. An aqueous polyurethane emulsion adhesive was prepared from epoxy resin, toluene diisocyanate (TDI) and dimethylol propionic acid (DMPA). The product structure was characterized by infrared spectrum.

7. The strong demand of epoxy resin and synthesis glycerol promotes the rapid growth of the demand of epoxy chloropropane.

8. We applied the Compounds to alkyd resin varnish, epoxy resin (E ?44) and cotton cloth to test their flame resistance.

9. Based on rheologic test results, a new epoxy resin constitutive equation was proposed with mathematical justification.

10. An undercoat for fluororesin coating based on epoxy resin and polyamide hardener.

11. The synthesis process of o-cresol formaldehyde epoxy resin was introduced and the factors affecting the synthesis reactions were discussed in this paper.

12. Epoxy resin as a typical representative of the thermosetting resin has been widely used because of its excellent properties.

13. Then tissues were dehydrated with alcohol and embedded in epoxy resin.

14. There also exists a range of specialised repair methods which use epoxy resins.

15. Effect of moisture and low-energy impact on carbon-fibre reinforced first generation and toughened epoxy resins.

16. The new wheel is made from orientated fibres of carbon, glass and Kevlar(), embedded in epoxy resin.

17. We can also show the transition in cross-linked polymers such as epoxy resin.

18. Flame Retardent laminate made from woven glass fiber material impregnated with epoxy resin.

19. Air - curing anti - sticking coating is prepared with epoxy resin as binder and polytetrafluoroethylene as filler.

20. water-borne acrylic resin was modified by grafted copolymerization of acrylic monomer and epoxy resin.

21. The moisture cured polyurethane was synthesized with mixing polyether diol, toluene diisocyanate (TDI) as main raw materials, epoxy resin and hydroxy acrylic resin as modifiers.

22. The main research contents and results are as follows: Epoxy resin and metal powder are averagely mixed as SLS material which is very easy to produce with low cost and good forming property.

23. Hydroxyalkyal lignin was synthesized from alkali lignin with propylene oxide. Then it was epoxied by epichlorohydrin catalyzed via boron trifluoride etherate to form lignin based epoxy resin.

24. The primary and secondary windings and iron core are insulated by epoxy resin. It has a good ability of insulation and moisture proof.

25. The Paper deals with the preparation of rust converting Epoxy resin by combination of a stabilizer and Ketoimine Latent curing agents. The application results are discussed.

26. WATER TAP: Taiwan SAN, made of copper, the surface coated with epoxy resin.

27. The influences of various materials on the coatings properties are studied, such as epoxy resin, reactive diluter, pigments, and additives.

28. Experiments were conducted to compare the abrasion resistance of epoxy resin modified with polyurethane, epoxy modified by butyronitrile, and some alike coating materials from abroad.

29. A cathodic electrodeposition coatings was prepared employing a polypropylene glycol toughness-enhanced epoxy resin as matrix and acrylic monomers as grafted copolymer.

30. A review about the synthesis, curing characteristics, heat resistance and applications of O-cresol novolac epoxy resin is Presented in this paper.

31. Epoxy resin is the common tackifier for polysulfide sealant. Adding epoxy resin into polysulfide sealant can exert an auxiliary effect on viscosity increasing.

32. Sucrose epoxy resin 2-2 was prepared by epoxidation using peroxyacetic acid.

33. The zero sequence current transformer is full enclosed type. The secondary windings and iron core are insulated by epoxy resin. The middle hole is used for cable going through.

34. The thermal resister of power LED is analyzed in this paper. Using the silver paste and epoxy resin as die bonding materials, two kinds of power LEDs are made.

35. Starting from natural amino acid, diphenol having a phenolic hydroxyl group was synthesized. Using the diphenole as comonomer, a biodegradable epoxy resin in which contain amide group.

36. The activity of curing reaction of modified rosin based alicyclic epoxy resin with modified methyl hexahydrophthalic anhydride was investigated by thermal analysis and gelatin time determination.

37. Modification by way of adding emulsion epoxy as well as blast furnace slag powder led to successful preparation of epoxy resin polymer cement mortar with excellent properties.

38. Radial lead coil, single or multi–layer winding on ferrite core, coating by epoxy resin. Products can be taped or packed in viny bangs .

39. A kind of cationic paper strength agent was prepared through the modification of polyethylene imine(PEI) with bisphenol A epoxy resin(BAE) emulsion.

40. Liquid crystalline epoxy resin is a kind of structural and functional material with good applied prospect because it combines the liquid order with cross network advantages.

41. The rate of reaction between novalac epoxy resin and acrylic acid obeyed first order.

42. Structure: Adopting polypropylene film as dielectric, meta 11 ized film as electrode, passive flame-resistant epoxy resin coating.

43. The invention provides application of cardanol in epoxy resin curing. In the process of using, the weight ratio of the cardanol to the epoxy resin is 1-60:100.

44. Epoxy resin is a kind of thermosetting resin with excellent general performances, but its toughness is not enough.

45. The influence of pigment to varnish base ratio and the ratio of epoxy resin to curing agent on film's performance were studied.

46. Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied.

47. A novel epoxy resin containing binaphthalene unit (BEBN) was synthesized.

48. A new kind of latent curing agent for epoxy resin, the dicyandiamide modified by m-Toluidine was synthesized under different conditions. The product was characterized by melting point, IR spectrum.

49. The formulation design, processing characteristic and material choice of winding without filling in epoxy resin cast dry-type transformer are introduced. The warnings in cast process are presented.

50. Organic Anticorrosive Coating The coating are preparation with a series ceramic powders, epoxy resin, modified polyurethane resin, solidification agent and a few additive.

51. It's influence on the properties of anhydride cured epoxy resin was studied by scanning electron microscope, heat analysis, limiting oxygen index determination and other methods.

52. Dry - type transformers are completely nonflammable, using organic material such as epoxy resin.

53. Axial lead coil, single or multi–layer winding on ferrite core, coating by epoxy resin. Products can be taped or packed in viny bangs.

54. Model LZBW-10 is a modified type based on the original oil-immersed transformer, the main insulation adopts cast epoxy resin, the integral transformer body is contained and enclosed in a tank.

55. Epoxy resin is a thermosetting resin with some good features including electrical properties, chemical stability, adhesive, processability and so on.

56. The invention discloses a powdered epoxy resin toughener and a preparation method thereof, which belong to the technical field of tougheners.

57. "Elastic epoxy", as a strengthening and solidifying grouting material, is composed of epoxy resin, furfural-acetone resin, plastisol, additives and curing agents.

58. An air-drying epoxy ester primer is prepared based on epoxy resin , fatty acid, drying oil, pentaerythritol and phthalic anhydride.

59. Dibromo neopentyl glycol, useful as a reacting fire retardent, is suitable to make unsaturated polyester resin, bromine - containing epoxy resin, etc.

60. Structure: Wound inmeta 11 ized polyester film, epoxy resin dip sealed.

61. Thimbleful OMMT could increase the toughness and intensity of the lignin-based epoxy resin.

62. The test result indicates that this epoxy resin material has a better mechanical relaxation behavior under a lower temperature condition.

63. Polyamides were widely used due to the flexibility of cross-linked polymers of epoxy resin cured with them.

64. A structure of the toughener contains a flexible segment and an active epoxy group, so the toughener has excellent toughening effect on the powdered epoxy resin.

65. LED is the heart of a semiconductor chip, the chip is attached to one end of a stent, is the negative side, the other end of the power of the cathode, the entire chip package to be epoxy resin.

66. Epoxy resin is a common kind of electric material which has excellent mechanical and dielectric properties.

67. dry-type transformers are completely nonflammable, using organic material such as epoxy resin.

68. With adding liquid CTBN rubber in epoxy resin matrix, the toughness of epoxy resin matrix could be increased, and the adhesivity between epoxy resin matrix and steel-ball could be improved.

69. Body: The body is kept afloat by a material called syntactic foam, which consists of billions of tiny air-filled glass spheres embedded in an epoxy resin, like hardened Styrofoam.

70. Nylon 66 was effectively toughened with potassium titanate whiskers which were surface modified with an elastic epoxy resin.

71. At present, alkyd, epoxy resin, polyurethane resin, acrylate and varieties of their modified resins are better domestic resins for waterborne coatings.

72. Therefore, if we want to improve the dosing quality of the vacuum epoxy resin dosing machine, we must improve the characteristic of measuring-valve.

73. It is significance to study and exploit epoxy resin composite with excellent arc resistance and dielectric properties.

74. In this paper, the effects of hydroxy-terminated butadiene-acrylonitrile copolymer(HTBN) on the toughness of epoxy resin were investigated.

75. Two-component polyurethane silicone rubber polysulfide rubber chloroprene rubber and epoxy resin sealant of this type are generally completed at room temperature vulcanization.

76. The linear heating apparatus formed by resistance wire was designed to investigate the formation of the microstructures of the cured epoxy resin.

77. In this paper, the novel photosensitive prepolymers were synthesized by the block copolycondensation of unsaturated polyester with epoxy resin.

78. According to the molecule design, a kind of modified resin which have both epoxy groups and hydrophilic groups was synthesized from polyfunctional group novolac epoxy resin (F-51) and diethanolamine.

79. Cyanate reacted with epoxy resin to produce oxazolidinone, which decreased the crosslink densities and increased the toughness.

80. Very low viscosity , Unfilled clear epoxy resin impregnating material, has excellent physical and electrical properties.

81. The influence of oleoyl polyamine prepared by oleic acid and triethylene-tetramine on the properties of cured product of epoxy resin and methyhetrahydrophthalic anhydride(MTHPA)was studied.

82. Hydroxyalkyal lignin was epoxidized by epichlorohydrin catalyzed via boron trifluoride etherate to form lignin - based epoxy resin.

83. The boron-amine complex containing oxaboron heterocycle and the mechanism and kinetics of the curing reaction of epoxy resin with the complex were studied by using DSC and IR analysis techniques.

84. In this Nper(Sentencedict), N-p-carboxylphenylmaleimide(P-CPMI)was synthesized and the curing reaction of o-cresol formaldehyde epoxy resin with it as cure agent was investigated.

85. The curing mechanism of bisphenol-A diglycidyl ether type epoxy resin (DGEBA) cured with Imidazole ( IMI ) was studied by DSC, FT-IR.

86. This article introduces the requirements of aligning to the installation of gear case and construction process, calculating for sheets of epoxy resin chock for gear case on board.

87. Primary and secondary windings and iron core are insulated by epoxy resin. It has a good ability of insulation and moisture proof.

88. Secondary air tuyere: aluminum alloy shutter, the surface was electro - sprayed by epoxy resin.

89. The high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(ELPB) cured by pyromellitic dianhydride(PMDA) and benzoyl peroxide(BPO).

90. The synthetic methods of modified acrylate latices with organic silicon compounds, epoxy resin, polyurethane, organic fluorine compounds were reviewed.

91. The epoxy resin poured body is the shell of the current transformer and is fixed on a soleplate through bolts.

92. Undesirably the toughening effect of liquid rubber in unsaturated polyester resin is much weaker than in epoxy resin.

93. This coffee table has a round top in honeycombed aluminium and black and white epoxy resin with solid pau ferro inserts.

94. In this paper a computational method for determining the temperature distribution in the high voltage Winding of dry epoxy resin distribution power transformer is suggested.

95. Epoxy resin toughened by liquid polysulfide rubber exhibits good anti-impact performance and anti-bend performance.

96. DSC analysis showed that PAMAM1.0/epoxy resin gradually liberated heat in two stages during the curing process, and the total heat liberated was less than that of EDA/epoxy resin.

97. An epoxy modified silicone resin, which had the features of epoxy and silicone resins, was prepared by the polymerization of epoxy resin with compatible and reactive silicone oligomer.

98. Bisphenol A epoxy resin was modified by polymethyl triethoxy silane (PTS), and a series of high performance PTS-modified epoxy resins were prepared.

99. Structure: Adopting po1yeser film as dielectric, AL foil as electrode and inductive construction, unidirectional lead, diaphanous epoxy resin dip sealed (Type BH is yellow diaphanous material).

100. Acomparison of the effects of acetoxy and hydroxy groups on the water uptake into the cured epoxy resin was made using the gravimetric method, DSCand corrosion test.

101. Electrospun PSF nanofibrous membranes were prepared to toughen TGDDM epoxy resin.

102. Based on this, QS toughener was added to form epoxy resin alloy of"sea island structure", thus further improving its adhesion.

103. The main hydration products in the system are C-S-H gel and micro-crystal hydrated calcium aluminate. When epoxy resin is solidified(), the organism is network.

104. FR 4 : Flame Retardent laminate made from woven glass fiber material impregnated with epoxy resin.

105. A new epoxy resin containing both naphthalene and dicyclopentadiene(DCPD) group was synthesized using 1-naphthol and DCPD as starting materials.

106. The paper introduces good quality and multiple-use complex epoxy resin binder and its application in anti-corrosion coating of chemical storage tanks.

107. The mechanical property and thermal stability of cured epoxy resin were closely related to the chemical structure of hydrogenated terpinene maleic anhydride.

108. Major Composite of thc SeaIant is bisphenol A epoxy resin, dicyandiamide, ureido compound and modifier etc.

109. It was found that novolac epoxy resin and TPP had excellent synergistic effects on the flame retardancy of ABS.

110. The modification effects on diglycidyl ether of bisphenol A(DGEBA, epoxy resin E-44)were studied by impact test, tensile test, bend test and SEM.

111. Modified epoxy resin was produced by adding the isocyanate-terminated prepolymer obtained from hydroxy-terminated butadiene-acrylonitrile copolymer (HTBN).

112. Using lead benzoxy as curing agent, cured epoxy resin was analyzed by means of IR spectrum and DSC curves. Lead benzoxy was considered to be catalytic curing agent.

113. In this paper, the effects of hydroxy-terminated butadiene-acrylonitrile copolymer on the toughness of epoxy resin were investigated.

114. The forming mechanism of hydrolyzable chlorine and its industrial reducing technology have been explored, with bisphenol A epoxy resin, by the author. And an effective way has been found.

115. At the presence or catalyst, the synthesis process of epoxy ester from tetrabromobisphenol a epoxy resin and oleic acid has been reported.

116. Reaction with GMA and photoinitiator, UV-Curable waterborne epoxy resin coatings have been prepared.

117. Structure: Adopting po1yeser film as dielectric, AL foil as electrode and inductive construction, unidirectional lead, diaphanous epoxy resin dip sea1de.

118. The carbon fiber fabric was impregnated much better by epoxy resin in RTM process than in vacuum impregnation process.

119. The invention relates to polyphenyl methylsiloxane modified epoxy resin and a manufacturing method of an electronic packaging material thereof.

120. The preparation method and performance of a new type of alcohol-soluble acrylate adhesive modified by epoxy resin for dry laminating film are introduced.

121. The effect of sepiolite on epoxy resin reaction was studied by gel time, DTA and IR.

122. A new epoxy resin plant alongside the planned glass epoxy laminate factory will be set up in Jiangyin, Jiangsu province.

123. The fast curing polymer alloy putty at room temperature was developed by applying of Resorcinol epoxy resin and mercapto contained curing agent.

124.

125.

126.

127.

128.

129.

130.

131.

132.

133.

134.

135.

136.

137.

138.

139.

140.

141.

142.

143.

144.

145.

146.

147.

148.

149.

150.

151.

152.

153.

154.

155.

156.

157.

158.

159.

160.