1. Another area of expertise is the repair of combustion chambers, used in both aviation and industrial gas turbines.

2. Those huge combustion chambers mean it's a challenge making the fuel burn efficiently.

3. The underside forms the combustion chamber with the top of the piston.

4. The burner maintains the necessary temperature in primary combustion chamber when burning waste with low or zero heating value .

5. The combustion chamber is equipped with auxiliary boiler for adapting to the change of medical waste calorific value and assuring burning temperature and effect.

6. The remainder of the air-fuel charge in the combustion chamber can consist solely of fresh and residual gases, without unburned fuel.

7. The uniquely designed combustion chamber, enlarged cylinder working capacity, and excellent fuel consumption rate have contributed to a larger power output of GM series compared with OHV motors .

8. A combustion chamber and its igniters, injectors, and other related apparatus in jet engine or turbine.

9. The geometry of the combustion chamber and the atomisation of the fuel play a decisive role here.

10. Combustion chamber, exhauster, chimney on production workshop, safe environmental protection, external does not affect the workshop health.

11. The supersonic combustion chamber inlet is a 2 D convergent - divergent nozzle.

12. The effect of combustion chamber shape on the mixing process of an impinging gas jet is studied.

13. The condensed phase particle size distribution affects the combustion chamber and nozzle efficiency of solid rocket motors to some extent.

14. Usually a gas cooler is used between the combustion chamber and hydrator.

15. Using a ball end mill to form part of the combustion chamber.

16. The spark ignited direct injection fuel system may include a fuel injector that provides a fuel flow to the combustion chamber during the intake stroke.

17. The results show that the flame height and the excess air ratios depend on the system pressure drop but not on the absolute pressure at the combustion chamber.

18. The piston and the cylinder bore may partially define a combustion chamber.

19. If coal gas excess, it shown dark red, muddiness ,() and the wall of combustion chamber could be seen hardly.

20. Through the analysis of fuel spay instantaneous momentum and carbon laydown in combustion chamber, the reason that the shape of needle tip influence on engine performance has been illustrated.

21. By means of analysis on ignition fail reason of auxiliary combustion chamber for catalytic cracking unit, the unreasonable place existed in igniter was found, and improvement plan was given.

22. The process of pressure oscillation propagation from pipe-line to combustion chamber was theoretically researched in this paper; the transfer function was also deduced.

23. To seal rings the film needs adhesion and cohesion strength to prevent blow-by , compression loss, and oil by- passing the rings to the combustion chamber.

24. Through homogeneous mixing between gas and air in cyclical combustion chamber of gas external combustion type lime kiln, it can be enough combustion, has homogeneous flame temperature.

25. Discharged from the air preheater hot air is divided into two units: a go Coal drying and conveying of pulverized coal, and the other shares directly into the combustion chamber .

26. An internal-combustion engine consisting essentially of an air compressor, a combustion chamber, and a turbine wheel that is turned by the expanding products of combustion.

27. The research results show that the engine combustion noise can be reduced by reducing the combustion pressure oscillation in combustion chamber.

28. The thermal post-combustion is used for two oven chambers, one of which operates in a pyrolysis or carbonisation mode and the other operates in the form of a combustion chamber.

29. It can be a effective way to be offered to optimize the matching of combustion chamber with injection nozzle for direct injection engine. It is of importance to the improvement of ...

30. These factors are mixture concentration, ignition advance angle, engine speed, temperature of cooling water and carbon deposit on the SUrfaces of the combustion chamber, etc.

31. The authors of this paper developed a transient temperature measurement system of burnt gas in a combustion chamber based on the theory of absorption-emission.

32. This inhibiting of flow oscillations adds stability to the combustion chamber.

33. As the air inlet diameters increase, the intake central swirl is intensified and thus fuel evaporation in the first combustion chamber is improved.

34. The authors consider that increasing the piston stroke is an effective scheme, and point out that the petaloid combustion chamber has a good adaptability.

35. The results shoW that the carbon deposit layer on the combustion chamber has strong isolative effect on the transient heat transfer between working medium and the parts of combustion chamber.

36. The geometry of the combustion chamber and the atomisation of the fuel a decisive role here.

37. In the paper, matching tests were made for different combustion chamber geometries, injection pressure levels and injection nozzle configurations in a 6110 type diesel engine.

38. Air at atmospheric pressure is sucked into the combustion chamber.

39. It can provide a powerful tool for the engineering analysis ofgeometry optimization for the combustion chamber.

40. The semi-vertical reverberatory furnace comprises a combustion chamber, a forehearth part, a vertical furnace and an aeration tower.

41. It can calculate effectively the variation of flame front area, burned volume, and heat transfer area with the process of flame propagation and can be applied to an arbitrary combustion chamber.

42. Increasing the intensity of intake swirl could improve the evaporation rate of the fuel on the wall of the combustion chamber, but the NOX emission increases.

43. Calculates the example for the two-dimensional combustion chamber compressible flow field.

44. The results of the calculation and the analysis of effects of combustion chamber pressure, mixture ratio, propellant injection temperature and injector type on the combustion processes are reported.

45. A perfectly stirred reactor model was adopted for its combustion chamber; and the steady quasi-1D isentropic flow was used for the nozzle flow.

46. The clogging of a briquet hole is prevented; a plurality of combustible gas is provided for the combustion chamber, promoting the sufficient combustion of the briquet.

47. All of which will offer automatism control of gas flux, flux of spelter liquid and temperature of venting fumes in combustion chamber assort of referenced basis .

48. For the simplified system was applied in a constant volume combustion chamber, the combustible mixture can be ignited at any situation.

49. The spark plug is installed in the combustion chamber of the gasoline engine and used to ignite the compressed combustible mixture in the cylinder.

50. It puts forward an effective deep drawing technology about the alloy board with low-alloy and high-strength so that the properties of motor combustion chamber case satisfy with the needs of system.

51. Combustion instability not only affects the stability of the aero-engine work, but also caused the combustion chamber flame tube thin-walled structure acoustic-vibration coupled fatigue.

52. The axial distribution of fuel vapor near combustion chamber wall surface can be improved by changing nozzle spray angle to improve engine combustion.

53. The cold smoke is the result of access of excessive engine oil into the combustion chamber, but fail to burning after evaporation.

54. Given sufficient turbulence in the combustion chamber,[http://] detonation is unlikely to occur.

55. The strong squish flow and vortexes produced by the special structure of the combustion chamber improve the fuel and air mixture and combustion spe...

56. The results are important to design combustion chamber geometry and control combustion stability.

57. It's beneficial to improve combustion rate of pulverized coal that Alance was fixed while Blance was moved away combustion chamber from reference location.

58. This paper presents a finite-volume method for flow characteristics simulation in a combustion chamber with a flat-topped piston during the compression stroke.

59. A new modular method for calculating the maximum combustion chamber pressure with stage combustion cycles is proposed in this paper.

60. Note that the compression ratios shown above reflect the expansion ratio, which is the ratio of the combustion chamber volumes when the piston is at Bottom dead centre and Top dead centre.

61. MA FU contains a multi component combustion catalyst, which promotes the removal of engine deposits especially those in the combustion chamber.

62. The lower one prevents the oil splashed onto the cylinder bore from entering the combustion chamber, and is called an oil ring.