(1) Remove all the rust with a wire brush.

(2) Remove all traces of rust with a small wire brush.

(3) Use a wire brush to remove the rust.

(4) We would imagine that the wire brush is very handy for cleaning up old iron and steel.

(5) Action with a scraper and wire brush, using manual labour, would give the desired result.

(6) Keep a wire brush handy for this purpose and rub down the grill after finishing your cooking.

(7) If the steel wire brush wear, change.

(8) Clean posts and clamp with wire brush.

(9) Treatment for the first patient - use wire brush to brush the private part.

(10) In this case , manual cleaning using a wire brush or scraper is not efficient.

(11) Use sand cloth or wire brush to clean both tube and cup to a bright metal.

(12) The third patient - use wire brush brush the gum.

(13) Use sand cloth or steel wire brush to clean both tube and cut to bright metal.

(14) Use sand cloth or steel wire brush to clean both ends to a bright metal finish.

(15) Mechanical method is to use wire brush or wrapped with wire cloth in the tube of the tube, and drag scale get rid.

(16) Any rust spot should be removed with wire brush or by abrasive blasting.

(17) Use a wire brush to clean a heavy accumulation on the clamps.

(18) Sand paper or a wire brush on an electric drill.

(19) Use sand cloth or steel wire brush to clean tube and cup to bright metal finish.

(20) If the flashing looks sound but is obviously porous, clean the surface thoroughly with a wire brush.

(21) The inside of the fitting should be brushed out with a special wire brush and rubbed with wire wool.

(22) Lightly sand scratches and chips with fine wet-and-dry paper, and remove all traces of rust with small wire brush.

(23) Category: yellow wire, purple Cooper wire, phosphorus Cooper wire wire, asbestos wire system with wire brush.

(24) Once back to bare wood, raise the grain by rubbing briskly with a stiff wire brush.