1. If the impeller won't move, you will have to remove the pump for cleaning.

2. Friction between impeller and dual - suction seal ring.

3. Impeller and shaft Marineland aquarium Magnum 350 5.04 U.

4. There is convenient impeller adjusting device.

5. Horizontal type, multistage single suction impeller.

6. Whirlpool Qibeng the impeller similar large gas turbines impeller.

7. Consist of housing, impeller, motor, base and connection box.

8. Conveyor belt. Flotation machine impeller. Decking.

9. Under the same impeller outlet speed, the flow speed of blade diffuser is faster than the vaneless one. The average flow field at impeller outlet trends to uniform.

10. Closed impeller is a kind of representation of complex surface parts.

11. Rotating impeller week, will go to a certain point of view, the local emergence of Sandy Bay's largest radial clearance or minimum clearance space.

12. The influences of impeller types, baffle configurations and gas sparger on critical speed of floating particle in an agitated vessel were investigated.

13. The impeller of LGY axial flow fan adopts high-quality aluminium alloy, and has the characteristics of light weight, high-temperature resistance, rust protection and corrosion resistance.

14. The inner flow field of modified Perspex impeller of a centrifugal pump was measured by advanced PIV system, and the absolute speed vectorgraph and original data of the axial eddy were acquired.

15. SBYB - 465 K two - impeller torque converter is made on the basis of the improvements of existing converter designs.

16. Especially the flow of compound impeller in the centrifugal pump at low specific speed is more complex and has more problems need urgently to resolve.

17. The impeller of the sea water pump is unevenly worn out.

18. Impeller suitable for the suction of greases with a low penetration index.

19. To sum up, a 3D-flow closed impeller can be machined efficiently, precisely,(/impeller.html) reliably and integrally with this method.

20. The bent pipe makes the flow field of impeller inlet strongly disordered.

21. Solids passing capability of the impeller offered shall be clearly indicated on the manufacturer's performance curve.

22. The imbalance weight of impeller of IFZ screw non-clogging pump has great effect on hydraulic performance of pump.

23. The impeller, wear plate and agitator are made of abrasive resistant 28% chrome iron (600 Brinell, 57 Rockwell C).

24. The principle of the instrument is that of a liquidiser with an impeller that emulsifies stones.

25. The flow of air through the fan is substantially parallel to the impeller axis.

26. If the pump does not export loaded check valve, high pressure water will reverse back pumps, impeller pumps water at high pressure have a reverse impact.

27. Also discussed are the effects of suction pressure and impeller vane number.

28. Preliminary designs were made for some of the major parts of the mower, such as the impeller of the centrifugal blower and the razor blades of the mower.

29. Alkaline resin chromite sand is used to produce qualified impeller casting.

30. Calculation results show that the solid-fluid coupling field has an influence mainly on the modal frequencies of the impeller, and less on its modal shapes.

31. Calculation similitude method is a commonly used way for determining structure parameters of centrifugal impeller.

32. Balance arrangment of the two impeller is adopted, So axial thrust on the impeller because minimus.

33. Impeller and diffuser are important parts in the Axial-flow pump and the later is the important part to take back energy.

34. The floating impeller may be tethered to a second impeller with a flexible member and pulley.

35. The type of the pump impeller and pump and centrifugal pump with a volume effect of particles suspended in mid-stream leaf out of date, do not hit any part of the pump, it is good non-destructive.

36. The domestic and overseas development of the roto jet pump was introduced and the research and development of two key components impeller and collecting pipe of the pump were introduced.

37. Results of this thesis provide guiding significance to waterpower design of impeller of the low specific speed centrifugal pump.

38. The influences of impeller rotational speed and gas flowrate on bubble diameter and distribution are examined.

39. Spiral Aerator is consisted of driving motor, air shaft, spiral impeller, out-shell; all the materials are erosion resistance and the dipped parts use stainless iron or FRP.

40. Product direction: valve parts, marine castings, impeller blades, mines wear - resistant parts , steel castings, and so on.

41. Impeller is a disc, on the circumference of the blade evenly with.

42. The pump performance would be affected by the two clearances in such a way that the clearance alters both volumetric leakage power loss and mechanical power loss (dick friction loss of impeller).

43. The motor is connected with the rotating shaft by a driving belt. The impeller is arranged at the tail end of the rotating shaft. The traveling car is also provided with a lifting motor.

44. Mainly includes bucket elevator, FU chain conveyor, aging silo, impeller feeder, packing silo, packing machine, belt conveyor for packing, etc.

45. In higher viscosity and higher power dissipation rate per unit mass, micromixing ability of full-zone is better than paddle impeller.

46. Dynamic aortic valve, a novel design for left ventricular assistance is proposed. An impeller similar to the airscrew is placed in the position of aortic valve.

47. YJD star unloader valve and welded steel impeller can also be cast.

48. CFY submerged pumps mainly consist of pump casting, pump cover, impeller, shaft, flexible coupling, pipe flanges, column pipe, outlet pipe, bearing frame, floor, motor frame and other parts.

49. By using Eulerian Formula, the author obtains the factors, both factors of impeller and of casing,() exerting influence on the theoretical pressure of cross flow blower.

50. This product through the impeller on a new line so that the volumetric efficiency further improved.

51. Star unloader valve and welded steel impeller can also be cast.

52. In addition, the correlations of for some better impeller - baffle - sparger combinations were obtained.

53. Adjustable impeller and the clearance between the boards to ensure efficient operation of the pump.

54. The main parts of pump are suction-stage, middle-stage, discharge-stage, bearing support, motor support, impeller, diffusor, shaft, shaft bearing, shaft sleeve, balance kettle, balance sleeve etc.

55. The condition for obtaining the minimal number of impeller revolutions is determined.

56. To testify the application of the hydraulic model library, doing the design of the similar transformation of the impeller blade, and attaining the satisfied result.

57. Fully new water pump, more powerful. Adopt a forward inclined impeller on the water pump to enhance water delivery capacity at low rpm and to enhance engine heat dissipation.

58. A method to machining twisted impeller of Roots blower with NC shaping machine was introduced.

59. An experimental investigation of the shrouded centrifugal backswept impeller flow field has been conducted at off-design flow using Laser Doppler Velocimeter (LDV) and shaft encoder.

60. The corrosion situation of some metal materials used for axial-flow pump and impeller of slurry pump in wet phosphoric acid production was studied.

61. Axial flow type and ballistic type. The speed of impeller depends on the speed of wind.

62. Role is to be closed impeller at a certain space, so the role of inhalation by the impeller and the liquid pressure.

63. Too much wear with dual - suction seal ring or impeller damaged.

64. A series of technological experiments are made and a qualified 3D-flow closed impeller is machined successfully.

65. For this, it is indicated that it is practical to analyze impeller vibrating using composition unit method.

66. A smooth power curve, not easy to have a super power, but this type of impeller cavitation performance than ordinary closed impeller, especially suitable for use in the pump pressure on imports.

67. Shell pumps not only by pooling the impeller Shuaichu liquid, is also an energy conversion device.

68. Which closed impeller very broad application, the aforementioned single-suction aspiration impeller double impeller belong to this form.

69. By processing scanning data the surface of impeller vane, a 3D boundary method that can eliminate yawp points speedily is explored.

70. The impeller is a key part of the wind turbine.

71. An approach for elastoplastic stress analysis of integrated impeller with splitter is presented in this paper.

72. This Paper analyzed the principle of sandiness water ablate box-shrouded impeller and its serious affects.

73. In order to improve calculation accuracy, factors such as effective power have to be corrected for calculation in design of a large ventilator due to higher impeller peripheral velocity.

74. The powder concentrator impeller enhances powder precision and high density product.

75. Since the material of atmospheric condenser, barometric discharge pipe, pump casing of follow-up water ring vacuum pump, impeller, and moisture tank was upgraded and anticorrosive p...

76. Particularly necessary to point out that the liquid in the pump body mass flow rate of less than the circumference of the circumferential speed of the impeller.

77. Shell brings together not only by the pump impeller liquid releases, but it is also an energy conversion device.

78. Impeller, designed with hydraulic model and made by precision casting, has the advantages of energy-saving, anti-winding and non-clogging, etc.

79. Strainer or impeller blocked Triangle speed is too low or too loose.

79. Wish you can benefit from our online sentence dictionary and make progress day by day!

80. This calculation result provides design basis for the establishment of stock pump with semi-open and fewer blades impeller.

81. This study reveals that the difference of radial gap size mainly influences the rotor-stator interaction via wake effects, which could be helpful to the coupled design of vaned diffuser with impeller.

82. The intermediate demister shapes air flow swirl generated by impeller rotation to get bigger particle and improve the arresting efficiency of the next filter screen.

83. The paper introduces the mapping engineering for MABS double suction impeller.

84. After observing the velocity vector distribution near impeller rotor, a fault in design was analyzed, and some proposals for improving impeller rotor were offered in the end.

85. The MPT Series features close-coupled construction similar to the MP Series, but uses a regenerative turbine vane impeller.

86. In the 1980's, the 6100 Series of Heavy Duty Recessed Impeller Pumps was developed to serve aggressive in-plant applications such as sludge and grit.

87. Impeller or both water inlet and outlet pipelines blocked up.

88. Pump lift pump depends on the size of the structure (such as the impeller diameter the size of the blades bend, and so on, the speed.

89. Vibrational characteristic of axial fan impeller is analyzed by composition unit method.

90. This paper studies the influence of flow in centrifugal impeller and outlet blade angle on the performance of centrifugal pumps.

91. The method of impeller parameters optimization design can be used in the selection of geometric parameters and the performance prediction of vehicle turbochargers.

92. The reverse engineering for MABS double suction impeller was introduced.

93. Skewness inspection when the level indicator in the impeller means to balance the side plate.

94. The utility model relates to a field of centrifugal blower production, in particular to a fan impeller inclined temperature control welding table device.

95. The pump casing, impeller, motor housing and stationary base elbow shall be manufactured of close-grained cast iron, ASTM A48, Class 30.

96. The results reduce extremely the CFD preprocessor time for through flow fan impeller used by air conditioner.

97. The paper deals with the principle and structured programming of a microcomputer numerical control (MNC) system that is used on NC machining the turbine impeller with 5-dimension interpolation.

98. It discusses the effects of using impeller sealing ring to regulate axial force of turbo pump.

99. The suction-stage, middle-stage, discharge-stage, diffusor and bearing support forms a working chamber and shaft, impeller(), balance kettle and shaft sleeve are pump rotor parts.

100. The results show feed time and impeller speed have great effects on nano barium sulfate particles.

101. Impeller has a single suction and double suction two suction fluid ways.

102. The impeller is static balanced, and it is fixed with sleeve and nuts aside, its axial position can be adjusted by sleeve nut .

103. Impeller and the body formed between circular flow, I inhaled and exports in the row outside the circumference of the impeller.

104. Based on the technology of rotating impeller de gassing in aluminum alloy melt, the effect of pulse gas current on the gas bubble size by studied with the water modeling method.

105. Here the air and water discharged from the return valve to the back entrance of the impeller.

106. Gas holdup increases with the increase of impeller rotating speed and aeration rate.

107. Sealing ring is fitted on pump body, while impeller sealing ring is an optional part.

108. The basic flow field structure and aerodynamic features of the impeller backside cavity are presented for the coupled computations of a centrifugal compressor and its impeller backside cavity.

109. The broken reasons of bailer of impeller was found out by analyzing some relevant cases occurred in a jet-type impulse turbine in China(), some measures to handling it was presented.

110. Closed structure impeller : adopt excellent hydraulic mode efficient, highly resistant to capitation erosion.

111. The vibrating spectrum analysis was done to centrifugal multi-level impeller blower, and found that the impeller has dynamic unbalance, so that the vibration of blower is to exceed the standard.

112. The heating assembly is generally applied for the closed impeller wheel and axle in the large-scale compressor group.

113. It is found that the blade angle of the gas dispersion channel, the type of the lower impeller and the impeller spacing have significant influence on the macro-flow field in the tank.

114. A new kind of combined impeller was presented based on the special requirement of polymerization and its mixed property was studied.

115. The results show different performance deterioration between different bent pipes, the larger distance between bent pipe outlet and impeller inlet creates more decrease.

116. Impeller are open, and closed three - Banbi, as shown in Figure 2 - 2 .

117. From the performance perspective, the type of impeller and the general efficiency closed impeller or less the same, but the type of impeller pump head curve dropped more.

118. The principle, steps and examples of designing the ultra-low specific speed impeller using the flow path blockage method and the analytical method are presented.

119. The casting technique with top gating system, outer shaped iron chill, compound casting mold and core assembly molding was used for producing aluminum impeller on a large scale successfully.

120. It can be used to make vaporizer, distributor, ignition and braking systems, slide block, electrical magnetic valve, wheel, and impeller.

121.

122.

123.

124.

125.

126.

127.

128.

129.

130.

131.

132.

133.