1, Lewis estimates that 40 to 80 percent of dentists actually autoclave their instruments as they should.

2, The head is removable for washing or autoclaving.

3, Make sure all instruments used during the procedure are autoclaved.

4, Silicone grease is insoluble in water and can be autoclaved.

5, Autoclaves are functioning but neither the pressure gauge, thermometer, nor the timer are working.

6, Some compound neutralizers may change in property after autoclaving.

7, Most membranes can be sterilized by autoclaving.

8, Results: Autoclaving could fulfil the requirement of sterilization of stomatologic instruments.

9, Alternatives to incineration are now available, such as autoclaving, microwaving, steam treatment integrated with internal mixing, and chemical treatment.

10, Conclusion: Autoclaving has reliable sterilizing efficacy and is the method of first choice for sterilization of stomatologic instruments.

11, Sterilization of biopsy forceps by autoclaving or cyclo-ethane take up 26.78%.

12, Standard autoclaving procedures using exposure to steam at 250 degrees Fahrenheit for 15 minutes eliminated the infectivity of vaccinia, HSV, VZV, and anthrax.

13, The results indicate that the autoclaving schedule the ratio of water to dry mixture and C/S ratio have effects on the carbonation of lime sand concrete in different degrees.

14, Because of frequent setup and disassembly, cleaning and autoclaving steam sterilization, the steam is infiltrated into the ultrasonic handpiece, resulting in failure of electric insulation.

15, Compared with HMT, autoclaving treatment is helpful for the forming of resistant starch.

16, The medical institutions using autoclaving for sterilization of acupuncture needles and scissors for treating wounds accounted for 58.1% and 82.3% respectively of the institutions surveyed.

17, After autoclaving, the peak viscosity temperature increased and peak viscosity decreased for all the starches except for waxy starch which showed an increase in peak viscosity.

18, Sterilization of biopsy forceps by autoclaving accounted for only 17.4%.

19, Under normal conditions, even with frequent steam sterilizing, autoclaving, and CIPs, the Sensor Cap has a lifetime of more than one year.

20, Some diets are coated by the manufacturer to prevent the pellets sticking together during autoclaving.

21, The endoscopes were sterilised after each examination according to local standards; the biopsy forceps were sterilised by autoclaving.

22, The results show that, the expansions of alkali-slag cement mortar are mainly taken place in earlier period under curing, hereafter,[http:///autoclaving.html] in autoclaving process the expansions are very little.

23, The treating chamber is laid-out as a pressure resistant autoclaving chamber provided with steam generation at elevated temperature and pressure.

24, Low-silicon tailing is used as the main raw material to make the standard load-bearing brick by pressing forming and autoclaving process.

25, I have a design problem with sealing out moisture during autoclaving.

26, Its color was observed by naked eye and bacterial contamination of the medical articles packed by it was examined after autoclaving and storing.

27, Considerable amount of work has been carried out on the development of resin transfer molding(RTM)as a viable processing alternative to autoclaving molding techniques .