1 Taxpayers want a hold-down on government spending.

2 The soft release mechanism in a controlled hold-down and release system was discussed in this paper and an upper bound model of the soft release mechanism was presented.

3 Remove the two hold-down bolts and lift index plate from valve.

4 In order to improve the launching reliability, the hold-down and release system will be adopted in the launch vehicle in the future.

5 The guide for the hold-down plate moving up and down is near to the lead rails in two sides. The good guide effect ensures the parallelism of upper and lower working sides.

6 The 17 HWV 001 waveguide mount with vacuum hold-down is an easy and flexible way of securing planar waveguide devices.

7 The sort of deployment mechanism, hold-down and release mechanism, and their general situation are summarized in this paper.

8 Install the isolation relay for the Battery Management System on the two studs that protrude from the hold-down bar.

9 The sides of the block are shown being milled away,[] removing the hold-down fixture holes used earlier and finally leaving the classic "V" shape profile.

10 It is also pointed out that the side force of the stretching joint due to position change shall be taken as the design basis of pipeline hold-down supports.

11 Machine process center to route, shape, drill and caut parts or panels, with laser locating system, vacuum hold-down system, vacuum pump, control cabinet and software.

12 Through researching the technology in other countries, we discover this technology is carried out by a hold-down and release mechanism.

13 The construction, force calculation and motor power calculation are described in the article for the hold-down system in plate mills.

14 Pendulum shear is used on Masteel CSP caster. The structure, working principle and failure of the hold-down roll hydraulic system of the pendulum shear are in discussed.

15 The billet is held in place in the die by a hold-down ring.