1. They reeved the rope through the pulley.

2. The worker threaded the wire through the pulley.

3. The Strongbeam Water Low bracket and pulley makes it simplicity itself to lower and raise the basket as required.

4. A string led from the axle, via a pulley held by another patient pupil, to a dangling weight.sentence dictionary

5. John Pulley of St. Paul's Square was appointed surgeon at a salary of ￡45 perannum.

6. A pulley block was used to ensure the safety of this manoeuvre.

7. The belt started wrapping up on the tractor pulley.

8. The lifting device is a rope and pulley system.

9. A connecting line is connected with the movable pulley.

10. The pulley is a simple machine.

11. Pulley specifically designed for heavy loads and intensive use.

12. If pulley keyway length is less than this length, rework long key by removing one-half of excess length between pulley and end of key to maintain balance.

13. Belt pulley for the output shaft of a gear, gear, electric motor, and output shaft.

14. If choose small belt pulley, it may enlarge the transmission of texrope. The ends of fan of dual-axes motor are only allowed to transmit by coupler.

15. The utility model provides a guide pulley device for the linear cutting of the rotating end surface, belonging to the auxiliary apparatus of an NC linear cutting machine tool.

16. Conveyor pulley is furnished on its surface with welded teeth, which are in mesh with chain belt.

17. The stone was lifted by means of a rope and pulley.

18. One of the walls in the gym had dual pulley cables.

19. He saw a cauldron to one side with its lid hanging above it,() suspended on a pulley.

20. As far as can be ascertained this happened near to the position of the guide pulley sited on the lower embankment.

21. The Corrado's supercharger sits alongside the transversely mounted engine and is belt-driven off the crankshaft pulley at 1.66 times engine speed.

22. A fellow engineer came to check on the work, and to do so had to ascend on a rope pulley.

23. Steel column is fixed to special jig, slipping below the installation position by chain block and lifting by pulley block and windlass.

24. So it is very important for rolling process of V-belt pulley to control metal flowing on tangential direction.

25. The new scheme is put forward to design magnetic pulley with large torsional moment by means of planar contact between end-cover and added flange fixed axially by stud bolt.

26. The ends of the wire ropes are respectively connected on suspension cages through fixed pulley blocks respectively installed on a headframe.

27. At the basis of distribution law of error formed by the processed pulley with various teeth and its effect on transmission, the scope of tooth of pulley processed is defined.

28. Driving mode of finger's mechanism is one of difficulties of mechanical dexterous hand. The current mode of rope pulley has some disadvantages such as insufficient stiffness of dynamic transfer.

29. Why It's Innovative: Instead of separating in the middle like a drawbridge, the Pont Gustave-Flaubert's deck is lifted straight up by a butterfly-shaped pulley system so tall ships can pass through.

30. Column crane arm is a light and small lifting ma chine in which CD1, MD1 electric pulley and chain hoist are used together.

1. They reeved the rope through the pulley.

31. Under arraying rope pillar function, two pieces of pulley block circles pillar to do left, right nimble swinging, which cause rope winds in regular arrangement.

32. Introduces to select changing plans and technique of sulfuration strong pulley in coal mine, ensures the quality, shortens the changing time.

33. The divided-flow two-level turbine engine with two pumps is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

34. I tried molding the pulleys (the step pulley and 6" pulley) in sand but after the 12th or 13th failed attempt I was ready to put the damn patterns on the countershaft and go with that!"

34. is a online sentence dictionary, on which you can find good sentences for a large number of words.

35. One end of the connecting line is connected with one end of the left pressure rod and penetrated the movable pulley then to connect with the right pressure rod.

36. The pulley drives the engine fan, water pump, and generator with a V belt.

37. The belt pulley is arranged in the belt groove, and therefore the dust can be prevented form falling on the belt pulley to influence the normal working.

38. In order to minimize the tooth direction error between practical processing belt pulley outline and theoretical outline, the optimal de sign method and results of hob outline of belt pulley a...

39. The floating impeller may be tethered to a second impeller with a flexible member and pulley.

40. Each pulley quadruples the amount of weight a single kite can pull.

41. The elevation and fall of the load is controlled by a cylinder driven pulley block.

42. To introduce the functions of the over-lay apparatus, the straightener, the traction grooved pulley and the take-up.

43. It can lift weight through pulley block and lifting hook installed on davit.

44. Fig 2. A double-line, straight pull with a typical winch and pulley arrangement. Adding a pulley block to your winch doubles its capabilities.

45. Fasten the pulley and the support block to your worktable.

46. The children contrived a pulley to lift things into their tree house.

47. The material used to create my chain pulley fabrication procedures are compiled from works of different authors.

48. Put the V belt on the pulley of the sewing machine.

49. The mentioned method is applied to design of pulley block compensation in luffing mechan ism and the results show that the method is feasible and effective.

50. The model of power bond and mathematics of driving and driven pulley oil vat(), PWM fast electromagnetic valve is built.

51. Turn of belt pulley to regulate graduated dial and press on the one button to change needle gauge.

52. A circulating two-level turbine engine with two pumps is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

53. At least one wire wrap around guide element (typically a pulley) is positioned away from the mounting means.

54. Jackup mast for marine drilling operation realizes hoisting of the mast by means of the pulley mechanism on the lower part of the mast.

55. Main drive: the belt pulley is driven by motor (4KW 960rpm).

56. The tepee-like tents and crude hide huts that comprise tauren towns stand in stark contrast to the turning windmills and pulley structures that keep the tauren grainmills operating.

57. Clean pulley, belt, and platter edge with rubbing alcohol if necessary.

58. It has a power take-off pulley for belt operation of other models such as a wood splitter of cement mixer.

59. It points out that the position of the maximum strain, stress and tension is at first group trough type roller, not at passing poion of pulley if the head drum works as pulley.

60. Equivalent triangle structure is constructed with hinged bar elements to precisely simulate the effect of wire rope pulley block in the finite element analysis of structure of construction machines.

61. To the functions of the over - lay apparatus the straightener the traction grooved pulley and the take - up.

62. The pulley moves in straight line along the I - shape steel and rotates alongswing arm.

63. Put pulley and rotor of the centrifugal together and made full use of magnetic field, the centrifugal permanent-magnet direct-current generator reduces the cost.

64. By crampon, lifting beam and pulley block as well as hoisting and mounting the bridge crane in parts,[] ensures safety and economy for the construction.

65. Has specialized length rocking shaft, plate pulley and single-seat photograph elevating gear and so on urgently need equipments, they can supply the photography movie, the television, MTV.

66. The weights are moved via a cable and pulley system.

67. With the test amplitude of vibration, the actual impact factor of pulley drive is determined.

68. Answer: the first to assay the following fe content, if iron content high, can use magnetic pulley cast the tail.

69. The skillful design of the pulley block makes the largest door leaf able to bear the 400kg dead load of the leaf.

70. Pulley bearings are frictionless.

71. Watch the propulsion ram and the attached rope pulley in action as the car ascends.

72. Younger teens then yank the rocks up with a pulley.

73. Numerical simulation of rolling process of an automobile air conditioner V -belt pulley has been studied by use of DEFORM software.

74. A pulley or a system of pulleys set in a casing.

75. Tap-Lock Timing BELT pulley with Taper-Lock Bushing is easy on and off, it can be used on variable hubs due to Taper-Lock bushing Bushing bores.

76. Constriction and self tightening function of V belt pulley is demonstrated in this paper.

77. The individual strands of each cable were hung in pulley blocks.

78. Pulleys are on the market that permit an adjustment in the width of the groove. The effective pitch diameter of the pulley is thus varied, and moderate changes in the speed ratio can be secured.

79. Turn of belt pulley to regulate graduated dial and pressthe one button to change needle gauge.

80. The forward pulley is large and is generally made from an in-line skate wheel.

81. A motor shaft gap used for a sealing plate for a seal air channel is left between the belt pulley and the end cover of the motor shell.

82. The dynamic force of the motor is transmitted to a cutter through a belt pulley, a separator and the driving flexible shaft.

83. A prototypical serpentine belt drive system, which includes two pulleys, one tensioner and belt, is taken as an example, and slip rate between driven pulley and belt is measured and calculated.

84. The company owns the most advanced hold in range, solid pulley productive equipments and various detecting instruments in nation.

85. The tower type belt driven long stroke pumping unit is composed of the crank-linkage-slide mechanism, movable pulley-narrow belt-fixed pulley mechanism and compound drum stroke-increment mechanism.

86. To finish this Seat Tube assembly we need to make provisions for the chain pulley mount.

87. When the belts have been located in the belt pulley grooves, moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.

88. In the mini-motorcycle multi-way for the latter with a belt drive transmission, primary, secondary driven pulley reduction ratio of the size of the decision.

89. Control the fabric feeding tension by adjusting the speed of fore guiding roller and rear guiding roller through exchange chain pulley.

90. When a belt pulley is adopted to transmit. the axis central line of motor should be parallel to load central line and be vertical with belt central line.

91. The reason is driven by a belt connected thru a pulley.

92. From the experimental results, the following conclusions were drawn: (1) Block compression force distribution on the driving pulley is significantly different from that on the driven pulley.

93. In this mechanism, two co-axial pulleys with different diameters are fixed between the driving pulley and the idler pulley in a traditional timing transmitting system.

94. The structure can convert the rotation of a drive belt pulley into the plane curve movement of the pivot bolt, realize motor driving of the stapler and ensure the stapling strength and quality.

94. Wish you will love and make progress everyday!

95. A dynamic system of the electric power driven rounding machine consists of a motor, a turbine reducer, a triangular belt, a big belt pulley and a small belt pulley.

96. While working , the teeth of belt and the teeth of pulley joggle each other to transmit the motion and the dynamic force.

97. Others have manually operated sidewinder mechanisms. Older blinds may have pulley cords, but modern blinds tend to be fitted with chain-operated controls.

98. Loosen the accessory drive belt at the power steering pump bracket, if equipped or at the idler pulley bracket (refer to Group 7, Cooling System for the proper procedure).

99. A large belt pulley (7) on the film picking main shaft (26) transmits the reinforced rotation speed to a fan main shaft (27) through a second-stage belt (8).

100. To demonstrate the proposed framework, the design of the compensation of pulley block in derricking mechanism was presented.

101. Synchronous belt and cause of damage belt pulley and its c.

102. Cadaveric dissection reveals that the trochlea is more than a simple pulley; it is a complex structure in close proximity to the orbital rim.

103. The utility model is a special mold for producing a V-belt pulley, which relates to a mold.

104. The greatest stress is produced on all"the static arc"of small belt pulley.

105. Place Taper - lock Bushing and Timing Belt Pulley on the transmission shaft.

106. The utility model provides a fur - removing cleaner which is suitable for a notched belt pulley.

107. Revolves, canned, the V-belt pulley organization, the cam gear, the crank slide, the bevel gear.

108. When the driving pulley rotates, the axis of the differential mechanism will move due to the different diameters of the differential pulleys .

109. The gearbox of the drive must remain coupled to the drive pulley for the holdback to function.

110. Loosen the coolant pump pulley bolts while the belt is still tight.

111. For instance, when the accelerator is depressed, the driving pulley width increases. At the same time, the driven pulley width decreases - the two combining for a "lower gear " effect.

112. The divided-flow two-level turbine engine with one pump is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

113. The cathode is hung on an anode bar, and a cathode bar is arranged on a nylon pulley and driven by a motor and a crank connecting rod to do reciprocating translational motion.

114. The pulley is considered one of the five simple machines.

115. This allowed the oil in the nose drive to leak out around the pulley.

116. The motor drives the rotating rack to rotate through the belt pulley; and the cross bar and the pipe barrel beat the soybean plant for threshing.

117. The work spindle get four-grade rotate speed, which is driven by a couple of two-grade v-belt pulley.

118. Dear Mr. Jack, The power steering pump pulley is still not correct.

119. The pulley block on the head of the main arm can be a combined type pulley block.

120. Multi-purpose mini-motorcycle in the belt drive gear for the latter, the main, the size of the driven pulley reduction ratio sub-decision.