1) The pursuit of excellence of die casting machine manufacturer.

2) Magnesium Die Casting have made significant headway in worldwide.

3) Using the FEM, the deformation and a - die casting machine have been calculated by ANSYS.

4) Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.

5) Die Casting Die Casting materials used wood materials can be selected, Machinable plastic, aluminum, iron, steel and so on.

6) A practical die structure and the process for die casting squirrel cage rotor are presented.

7) As a result, the cold chamber die casting machine has to be equipped with melting and transportation system of magnesium alloys.

8) The numerical technique is applied to simulate die casting process of semi-solid AZ91D magnesium alloy.

9) Die Casting Machine Supplies: plunger head , cylinder, piston oil spray, and so on.

10) A solidification simulation software for pressure die casting processes has been developed.

11) High - strength zinc alloy die casting material for beautiful and elegant lock and high security performance.

12) High Pressure Die Casting which is a net shape manufacturing process with high efficiency, short production cycle,[http:///die casting.html] and low ...

13) Introduced the new die casting process such as semi-solid die casting, solid die casting, vacuum die casting etc.

14) We professionally deal with various kinds of punching, die casting, metal machining and jointing discreteness operations of automobiles.

15) The opening force of die casting machine drives the crossed compound dog-led cam mechanism draw core in inboard concave, and then make the hydraulic loose-core implement to draw the hollow core.

16) Produced various types of injection molding machines and die casting machine.

17) The hot chamber die casting is a traditional die casting method, and there are several things that must be paid attention during the installation and operation of the hot chamber die casting machines.

18) The hot pot die casting technology of large cross section aluminum bar are introduced.

19) A system that can protract add-pressure technical curve of low-pressure die casting has been programed , it may be used easily and quickly in the technics.

20) The up-to-date status of the research and application with numerical simulation in pressure die casting was analyzed based on the analysis of filling patterns.

21) The fan component is produced using cold chamber pressure die casting process.

22) Is a Hong Kong-owned enterprises, specializing in the production of die casting equipment .

23) Based on the temperature measurements and mold filling experiments, a mold filling simulation software of Low Pressure Die Casting (LPDC) was developed by using SOLA VOF algorithm.

24) According to an amount of experimental data associated with the experimental conditions, the modified threshold value using sodium compounds has been determined in gravity die casting of ZL102.

25) Second, determine the feeding amount of radio radiation machine Stratton die casting machine feeding amount is an important parameter for the device.

26) The effects of painting technology on mechanical properties and structures of low pressure die casting of A356 alloy wheel with T6 and double aging heat-treatment were studied.

27) An aluminum silicon die cast alloy having a very low iron content and relatively high strontium content that prevents soldering to dies into die casting process.

28) Used new technology and method for the design of die casting machine.

29) Failure analysis of parietal cracking in scavenging pump made of die casting aluminium alloy was carried out by means of metallographic examination, SEM analysis and so on.

30) Systematically analysed aluminum alloy wheel product structure and characteristic of mold design, and the advantage and feasibility of aluminum alloy wheel low pressure die casting technology.

31) Numerical simulation technology has been carried out to analyze the filling process of an aluminum alloy wheel produced by low pressure die casting.

32) Die Castings, Plastic Moulding, Die Casting, Chrome Plating, Plastic Moulding, Presswork Die Castings.

33) In the design of die casting die screw thread screw thread unloading is a difficult point.

34) Companies specializing in renovation of die casting machine, hot - room, cold room machine.

35) Casting parts mainly include casting die casting, gravity casting, precision casting etc.

36) The die construction , running principle and features, technological process flow, technique parameters and product performance of aluminum alloy integral naves by gravity die casting are described.

37) The first magnesium alloy die casting machine designed by the group is an unprecedented case nationally.

38) Changes in hydrogen content in liquid aluminum were measured under different relative humidity of compressed air in low pressure die casting.

39) Heat treatment of pressure die casting is not possible but due to the high rate of solidification the mechanical properties are good.

40) The results showed that although the vacuum smelting has strongly degassing capacity, the degassing effects is relevant to the relative humidity of compressed air in low pressure die casting.

41) Three heat transfer mathematical models are given based on working condition of horizontal cold chamber die casting machine.

42) A new casting technology for inlet manifold in tilt casting machine gravity die casting was described.

42) try its best to gather and create good sentences.

43) The die design and technique of gravity die casting process for driven belt wheel are introduced. The causes and corresponding resolving methods of some typical defects are analyzed.

44) The practical structure of die casting mould with the rotational automatic thread demoulding for shell parts, the calculation of mode locking force and the process parameters were presented.

45) Computer simulation was employed to optimize filling system to predict filling process and prevent the defects for Al alloy automotive parts in semi-solid die casting.

46) The position of overflow and thicker inner gate was optimized to reduce the probabilities of cold shut, flow marks and slag. Furthermore, the surface quality of the die casting improves.

47) It has elaborated the advantages replacing die casting and common die forging with semisolid die forging.

48) Structural evolutions of ZL 112 Y die cast alloy in procedures of semi - solid die casting were investigated.

49) The temperature and stress fields of a thin-walled magnesium component in high pressure die casting(HPDC) can not be investigated optically but can be performed shown by numerical simulation.

50) A study of optimization is made to the mold filling simulation on low pressure die casting for automobile wheel casting.

51) Welcome advice, and, Wing On die casting machine - better!

52) The newly developed method of gating system design for zinc alloy in die casting is introduced.

53) This new model is designed to predict die erosion due to cavitation during filling in high pressure die casting.

54) Be familiar with stamping, machining, injection molding, die casting, and finishing process, inspection gauge, weld fixture.

55) By 1920, the earliest cold chamber die casting machine was published.

56) I plant with large, medium and small molding machine. Blister machine, aluminum die casting machine multiple.

57) A die casting die with pumping crossed cores by crossed compound dog-led cams and hydraulic pressure is used for cupulate parts with inboard concave.

58) A new casting technology for inlet manifold in tilt casting machine for gravity die casting was described.

59) So far the largest domestic zinc alloy die casting machine room of professional producers.

60) During die casting, core deformation resulting in batches rejected castings is very easy.

61) Hydraulic drawing-core mechanism was adopted for two-side of inner-sinking in the die casting die, and pre-resetting mechanism was set to avoid the interference of core slide with ejector pin.

62) Method used to reduce blow hole defects of die castings include 4 aspects:melting, pattern die. parameters of die casting process, and stripping agent.

63) The bottom of shot sleeve is filled with melt by horizontal cold chamber die casting machine, when the beginning of the slow shot phase, volume on the melt to the top of sleeve is occupied by gas.

64) The stu dies showed that the reverse draft was caused by the effect of die locking force reiteratively in the long die casting processes.

65) It is indicated that, with it special merits, low pressure die casting based on the electromagnetic pump will play a important role to produce magnesium wheel.

66) The die casting die design for 3 series of auto - level instrument with 11 types was introduced.

67) J1125 type horizontal cold chamber die casting machine was used to produce the aluminum alloy housing of motorcycle based on its complicated shape, thin-wall and small profile dimension.

68) The die design and technique of gravity die casting process for driven belt wheel are introduced.

69) The factory has various kinds of advanced numerical control processing machinery and 2000 tons oil die casting machine for the casting of large structure component.

69) is a online sentence dictionary, on which you can find good sentences for a large number of words.

70) Effects of SSS die casting processing parameters on properties of ADC12 aluminum alloy castings were examined by a standard tensile testing specimen with different ingate configurations.

71) High purity die casting alloys of the AM and AZ series make up the standard product.

72) The current research and application status of the creep resistant magnesium alloys used for high pressure die casting and for gravity casting in automobile were reviewed.

73) A new die-casting die fit on cold chamber die casting machine was redesigned in the part of the center gate and floating flow-distribution.

74) Zhejiang Baoshi Casting co. , Ltd was found in 1995, It is specialized in Gravity Casting, sand casting and low-pressure die casting.

75) The progress of die casting technology of magnesium alloys, such as semi-solid die casting, vacuum die casting etc.