1. Others strengthened weak hands by molding clay.

2. Experts say most cases of positional molding happen at or before birth and get better on their own.

3. Uses the import molding tool steel vacuum treated.

4. Remove liftgate opening ( headliner ) upper trim molding.

5. Work in coordination with the Molding Supervisors, assuring quality.

6. It's curing temperature high and difficult to molding.

7. Install beltline molding and weatherstrip seals.

8. Install, set up, troubleshoot and start up molding machines, as well as secondary and auxiliary equipment.

8. try its best to collect and build good sentences.

9. Objective To establish the best molding technics of Biyan Tablets, a patent traditional Chinese prescription for rhinitis, and to improve the hardness of the core in coaling.

10. Using molding methods to produce small aspherical elements is the best economic way with the best repetitiveness.

11. A projection television (TV) and a mold for molding a cabinet of the same are capable of reducing the number of parts and simplifying a production process.

12. In the technology of fiber placement molding , it is main to use the assembly of placement delivery head.

13. The molding sand that there is pile in the housing of engine and cast core iron.

14. I tried molding the pulleys (the step pulley and 6" pulley) in sand but after the 12th or 13th failed attempt I was ready to put the damn patterns on the countershaft and go with that!"

15. Material is cementsandcoal dust high pressure molding need not sinter. The product with good strength colourful.

16. Bodacious and Bonemeal chewed rawhide strips the size of ceiling molding.

17. Floors and columns were painted to look like marble, and 24-karat gold leaf was applied on molding.

18. He wants to control what information the public gets in the hopes of molding public opinion if and when it is needed.

19. In the first place, it is pointed out defects of national standard metal molding tension test specimen for casting aluminum alloy in this paper.

20. The resista nce decreases intensely when the slenderness ratio of the hot molding sand layer increases.

21. The materials, gas channel design and mould design of Gas - Assisted Injection Molding were primarily introduced.

22. In the production of electrolytic aluminum the aluminum holding furnace is one major molding device.

23. The work principle of double insurance level switch, float design, mold design and steam foaming molding technology are introduced.

24. Improved injector nozzles seal off better to keep the process leak - free and the molding operation dry.

25. A specially-designed addition agent is used instead of coal dust in green molding sand for the trial production of impact molding line made by GF company.

26. But this problem will be settled preferably by using the air-stream and synchro-formed clamp plate impact molding.

27. Fabrication process of polymer microlens arrays is introduced based on soft lithographic UV - molding replication method.

28. This paper deals with a measuring method and tester for the three properties of molding sand.

29. Polyether imide is a suitable plastic material for forming the substrate plate. A suitable molding process is injection molding, wherein a highly polished mold is used.

30. Therefore, the two color and two taste hard candy molding apparatus is formed, and the two color and two taste candy molding apparatus can produce hard candies with two colors and tastes.

31. At the same time, Lao She's androcentrism was shown in his molding of characters in his novel.

32. Stainless steel cylinder mould is mainly used for the paper molding of circular screen paper machine.

33. Know extruder, injection molding, chiller, punching machine, lathe machinethermoforming packaging machine, etc.

34. Assist Production Manager to do hiring and training in Molding department.

35. The paper discusses the method of optimistic designing of joggle mechanism of plastic molding press.

36. Application:Melamine resin molding compound can be applied in a wide range, mainly for producing various melamine porcelain-like tableware used by hotels, schools, fast food restaurants and household.

37. The technology of fiber placement molding mainly uses the assembly of placement delivery head.

38. The ice cabinet is only limited to store the molding raw material sweetmeat cores.

39. A 35 nom. Shore D, containing non-discoloring stabilizer[/molding.html], plasticiser free resin for injection molding and extrusion; with low temperature impact resistance as well as excellent mechanical properties.

40. In addition, the simple plastic molding process also can reduce the reject rate.

41. Plastic injection molding is an important method of molding, which apply mainly to the thermoplastic plastic molding, can be a complex shape of the precision molding plastic parts.

42. Expansion extrusion molding, extrusion molding apparatus therefor, and process for producing pressure-sensitive adhesive sheet.

43. Main ingredients: olive, elastin, molding resin, plant amylose and silk protein hydrolysate.

44. The research situation of the molding technology of two kinds of amorphous alloy is introduced, one is the superplastic precision net forming and the other is near-net-shape casting technique.

45. When the vibrating sieve moves, materials are sieved at the same time when the materials are struck by the striking body, which enhances molding rate.

46. Choosing normal ceramic material and using polyurethane's foams experiment for molding, a catalytic carrier of porous ceramics with high performance can be produced.

47. The items for exporting are brushes, blankets, injection - molding products, bionic bait, articles, etc.

48. We would take apart my toy cars and look at the casting, molding and assembly.

49. The edifice is covered by ornate and colorful molding, pilasters (pseudo columns), and arches, many of which contain bas relief sculptures.

50. The property and characteristic of blending vulcanization system for air curing and compression molding were compared.

51. Gas assisted plastics injection molding process includes injection of polymer melt into mold cavity and then injection of gas-compressed into the polymer melt.

52. The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to Harden when cooled.

53. The result shows that the plastic strain at the heel region induced by wire bonding process, molding process and the thermal stress and strain in solder reflow are the main causes of heel crack.

54. The capabilities of the company range tool engineering to high and low volume production in precision stamping, precision molding, plastic painting, plastic decoration and various assembly techniques.

55. It for consolidating molding sand, such as resin bonded sand, as well as tamping sand, such as clay sand or self hardening sand.

56. Be familiar with assembly process with concept of molding and stamping.

57. The twice shift is prevented by convexo-concave parting surface, and the special weight and mold clamping mechanism is applied in this molding line. The successful examples are finally listed.

58. While Burchard was experimenting with refrigerator insulation, he came up with a novel way of molding low-density foam.

59. A medium modulus resin suited for injection molding of Air Bag Deployment Doors.

60. Through clever imposition after grinding machining molding tray appearance will be attractive.

61. This machine is used with a standard screen together to test grain distribution of molding material.

62. This factory has the multi-Taiwan injection molding machine, take produces the great source series plastic water cock as the primary service.

63. Novolac for shell molding was gained under direct microwave irradiation and microwave irradiation associated with water bath using this device.

64. It is easy to strike arc. The welding molding is beautiful.

65. The molding of administrative personality would need a longer period, then can become the steady psychological feature which fluency people's behavior.

66. Have a laser-mediated molding machine, ultrasonic cutting-edge machine, propeller plane over the post-production processes and other advanced processing equipment.

67. This experiment studied the influence of mold design on molding a cuppy product from maize stalk powder.

68. Polyphenylene sulfide ( PPS ) composites filled with Polytetrafluoroethylene ( PTFE ) and kaolin nanoparticles were prepared by compression molding.

69. The molding made by hollow workblank wooden pattern achieved the rapid casting of the workblank of gla...

70. Home - made vertical applanation MLB 880 molding machine type.

71. The scrim layer may be a glass fiber or carbon fiber scrim, or veil, that has absorbed resin from the sheets of prepreg during a molding process.

72. Work with international suppliers and external partner to build up a ceramic injection molding process line.

73. By adopting the reaction injection molding method, a high performance polydicyclopentadiene composite material can be prepared simply and effectively.

74. Discusses with other managers ( Engineering, Project, Production, etc ) about molding improvement program.

75. PTFE gasket is manufactured by molding method with PTFE granular resin.

76. The properties, development, production and process of molding FRP well lids and waterspout lids are introduced systematically.

77. The degree of compaction of molding sand at the deep pocket of a mold and its improvement have been investigated experimentally under plant conditions.

78. Second-ranking knot before help, insole and vamp without first wipe glue, not only save artificially, but after molding heating never degum, ensure perfect shape.

79. Mold temperature control Series auxiliary equipment such as injection molding machine Products.

80. Precision molding the surface grinder is the honor of our manufacturing products.

81. Methods for the preparation of nano-ceramics including the preparation, molding and sintering of nano-ceramic powders are introduced in the paper.

82. The more complex type also provides structural support to react molding forces and restrict mold deformation.

83. The invention provides an extrusion molding apparatus capable of improving strength of a molded article.

84. Models the steel molding to have the unique formula, has the good inoxidizability , its service life is about metal window 10 times.

85. The molding filling process is a very important phase in RTM.

86. I. Features: PTFE gasket is manufactured by molding method with PTFE granular resin.

87. Two color machine 2, forms machine, machine oil, advanced injection molding machine, and so on the number of machines outside processes.

88. It may merely be a case of removing rough edges or tossing away molding to expose irregularities, in some cases to remove a prop and stand on one's own feet.

89. Jiangyin Division under the molding Group ( listed companies ), 32 enterprises.

90. Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.

91. Analyzed the box molding, filling and CIP cleaning process flow of the gable-box packaging machine, expound the feature and key technology of the machine.

92. In this paper, some Colloidal molding methods of advanced ceramics are introduced.

93. Compared with other kind of precise casting processes, FCP can reduce the environment pollution caused by pattern and molding materials as well as realize near net casting.

94. Results show that the rectorite cant be used when molding sand, but it is a good suspension agent for mold coating.

95. Metal Injection Molding, One step Vacuum de - wax sintering process, Powder metallurgy monthly.

96. White heat-curable silicone resin composition, optoelectric part case, and molding method.

97. The Optimization objective function of the biomass Compression molding process had been made.

98. The forsterite ore deposit in Yichang of Hubei Province, being one of the limited large ore deposits across the Mainland China, is used to produce molding sand.

98. Wish you will love and make progress everyday!

99. Resin coated sand (RCS) for shell coremaking and shell molding by hot box process is evaluated and found that is uneconomical.

100. At the same time, precision molding can decrease the reject ratio of refiner plates, and optimizing the alloy and shakeout time can eliminate the need for heat treatment.

101. Metal cutting is one of the most important methods in part molding, playing an significant role in manufactural areas.

102. In renovation of the foundry shop, the original used sand suction system was dismantled, which caused lower quality of the molding sand.

103. In blow molding, a molten tube of thermoplastic material is formed, and then compressed air is used to blow up the tube , forcing the material to take the shape of the interior of a chilled blow mold.

104. Casting quality and rejection rate are remarkably affected by the quality and property of molding sand, in the process of clay sand green mold casting.

105. The majority of resistance comes from the neighboring hot molding sand layer.

106. In order to effectively achieve the stratified water, first of all to have a hierarchical set of injection molding technology, but also a guarantee that the technology means to achieve the test.

107. Major equipment is vacuum - injection machine, low - pressure injection molding machine, three - dimensional laser scanner camera.

108. Three-dimensional isothermal material flows in the metering section of injection molder with different screw heads during injection molding are simulated through POLYFLOW software.

109. Objective To determine the molding process conditions of the medicinal carbon granules.

110. The composition and film molding process are studied to improve the planeness and roughness of the surface of transfer metal layer. This technology is mainly used in CFRP metalizing by transfer.

111. By using film laminated molding method, unidirectional high-modulus carbon fiber reinforced copolyimide composites were prepared.

112. The invention discloses a diesel engine four air head gravity casting mold and its molding method.

113. Shaped part: board molding machine, paper adjustor, press machine, shaped flat table and shaking motor.

114. Metal injection molding is a new net shape technology applied to produce complex-shaped metal parts, in which materials are metal powder and binder.

115. The basic principle of plastic molding technology has been analyzed, and a detailed description of the precision molding technology.

116. Technology of plate type steel castings produced by air impact molding line has been introduced AAR.

117. Intensified polypropylene injection molding, excellent anticorrosion, low price and wide applicability.

118. In addition, along with the age growth, in the corium layer elastic fibers, the rubber plateau protein breaks down along with it pine, also will facilitate the old molding pore production.

119. Apply to the injection molding, extrusion, casting, and so on.

120. Two kinds of injection systems of full electric molding machine are analyzed.

121. They are coloring of nuclear track, nuclear track sheet replication and molding of micro metallic cones from nuclear tracks.

122. The animation language system may divide into three parts specifically, namely animation molding language, animation narrative language and animation performance language.

123. The hydraulic system of injection molding machine is the representative example, it need to control cylinder speed and hold pressure, so it indeed to use pressure and flow rate multiple valve.

124. The Chinese government found warehouses filled with molding machines, gilding machines, sealing machines and air compressors.

125. Our company mainly produces vinyl cutter , molding machines and engraver machines, etc.

126. It introduces the properties, grades, application and methods of molding and processing of polysulfone produced by Amoco Chemicals Company in USA.

127. Produced various types of plastics extrusion unit, injection molding machine, blowing machine, crushing machine, dryer, printing machines and various accessories.

128. In China, Sidel has a 40,000sqm multi-product facility in Beijing with the capability to assemble all equipment found on Sidel's complete lines, from blow molding to palletizing.sentencedict .com

129. The shell molding process is one of the advanced technique with high outcome and lower consumption.

130. In order to enhance production efficiency of loop-tie-wire and reduce labor intensity of workers, this paper developed a suit of loop-tie-wire forming machine molding equipment.

131. Be familiar with stamping, machining, injection molding, die casting, and finishing process, inspection gauge, weld fixture.

132. The engine racks for automobile were manufactured by injection molding machine process automation was realized.

133. Polyvinyl chloride ( PVC ) is a heat - sensitive polymer resin, with degradation during molding.

134. Furthermore, all thermoplastic materials contract as they solidify, which means that the molding will shrink on to the core which forms it.

135. Romesh Ratnesar, in his book Tear Down This Wall, said that Deaver "was the most powerful force in the molding of Reagan's public image, " and that "his true talent was stagecraft.

136. In tradition, the technician must use trial and error method to search the optimal injection molding parameters, which will get the cost and the time required to increase remarkably.

137. Pumice concrete after being close-grained and molding is not sensitive to maintaining conditions, and this idiosyncrasy can predigest maintaining measures and reduce lacuna.

138. The state and variation history of polymer in cavity have direct influence on final part performance and quality in injection molding.

139. Computer - cutting, stamping, molding pressing aging, high - pressure water cutting, and other advanced equipment.

140. Unreinforced, Super Tough, black polybutylene terephthalate resin for injection molding.

141. Using a razor knife , slide the blade between the windshield glass and the inboard edge molding.

142. The blow molding machine consists a rotary blow - station device, an infeed and an outlet transfer devices.

143. To address this issue, jet molding, offset molding and screw-type machine molding liquefy the thermosetting plastic just as it passes through the injection nozzle into the mold.

144. The researchers blunt trauma by molding a layer of clay onto the inside of the armor.

145. In this process, plastic molding powder, blended with fillers to enhance the final product's properties, is placed directly into an open mold cavity.

146. The effect of the technological conditions such as molding method, raw material proportioning, pugging times and sintering system on the performances of porous permeable bricks was studied.

147. Our company can produce Knurling, embossed , printing, spraying, three-dimensional molding, such as more than a dozen varieties of six categories.

148. It is the key to guarantee stable and consistent quality of clay molding sand in mass-production of sand castings.

149. The results show that the monolith with higher surface area and better mechanical properties could be prepared by molding the mixture of powdered activated carbon and the organic binder.

150. This box molding is comparatively complicated, blue white flower is bright - colored, layout is proper.

151. A medium modulus polyester alloy suited for injection molding of Air Bag Deployment Doors.

152. A preparation methods of phenolic molding material with low chloric ion is introduced in this paper.

153. In molding process the maximum value of acceleration of the molding table has been tested by means of piezoelectric accelerometer, electrical charge amplifier and peak volt meter.

154. The subway building glass curtain wall uses is high tech " breaks the bridge " the heat insulation molding, in addition the double-decked void glass, burning hot will obstruct besides the building.

155. Two elements, siphonage temperature and siphonage time, that influence siphonage debinding for billets made by metal injection molding were investigated.

156. The generation processes of several typical injection molding defects, such as jetting and snake flow , sink mark and bubble, were directly observed and recorded.

157. LR-4L-four straight cut foam Main apply various large-size foam or vertical slices, slices of foam molding work. The same can be all kinds of paper processing of EVA and Pearl cotton cutting work.

158. For cutting pug strip from the pug mill[ ], preparing pug cake of fixed length and quantity for molding machine and stamping machine and producing products of uniform thickness.

159. It was pointed out that the strength of molding sand and compactness of sand mold is the key factors influencing the rigidity of green sand mold under normal temperature.

160. The preparation technology, property and molding conditions of the flame-retardant phenolics without flame retardant is introduced .

161. The results show that vibration injection molding has a great influence on mechanical properties of semi crystalline material molded samples, but no influence on non crys.

162. Analysis is done to the causes of reject A30 block with sand inclusion, i. e. the elements of molding sand feature; cast structure, casting speed and arrangement for casting system, etc.

163. Manufacturer of RCA jack, terminal block, push terminal, binding post, metal stamping parts, tapping and plastic injection molding.

164. Stevens, noting that the wallpaper and plaster molding are in good shape.

165. The establishment of the Department of the die, silk screen printing workshop, injection molding workshop.

166. The aluminum propeller which is molded in one body with airfoil design, its exhaust wind is much higher than steeliness propeller that is stroke out and molding.

167. Shell molding of phenol formaldehyde resin coated sand has been widely used in foundry and with prospective future.

168. OD grinding machine with point arc and Dresser, forming all kinds of precision molding machine - son.

169. Congratulates the heze cosmos precision molding limited company website on-line!

170. Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.

171. It is an effective way of eliminating the occurrence of silicosis in fettling workers by substituting silica with limestone as molding material in steel casting factory.

172. JIEYUAN The aluminum business is a specialized production each industry aluminum molding, different molding Group.

173. The Var Sec Sweep molding method, a universal 3 - D design method for disc cam, is presented.

174. The function of the assembling of the injection mol ding screw head is very important for pressure control during molding operations .

175. The present invention discloses a horizontal disc-type plastic injection molding machine, comprising a turntable device, an injecting device and a die closing device.

176. A new intelligent multi - properties tester of molding sand is introduced in this paper.

177. The Company has advanced injection molding machine and plastic mold manufacturing equipment.

178. The injection molding of the stated metal insert and complete plastic layer.

179. A new phosphate glass for high precision molding with low transition temperature Tg and good chemical durability has been developed.

180. Some analyses and suggestions were given on the normal casting defects, such as rat tail, sand mold convey after mixing, the number of cores in core shooter and preservation period of molding sand.

181. Diseussion about the course during molding and easting of negative dry - sand EPC has been expounded.

182. Using Imported Prepreg as the Raw Material, The Second Overall Compression Molding for External Trough Line and the Tube, Excellent Surface Finishment and Mechanical Performance.

183. PVDF square wafer carriers for solar cell were developed by injection molding method.

184. A group of Stinger block castings sits on the top shelf while a set of wax blocks are ready for the lost wax molding process to make the next set.

185. But this problem will be settled preferably by using synchro - air - stream impact molding method.

186. In various embodiments, the manufacturing may involve molding a hardenable dental material in a mold cavity that may be lined with a mold liner.

187. The application of composites molding by vacuum - only cure technology in SUAV airframe is presented.

188. With the cash from his mother, he bought a couple of plastic molding machines and started making channel-changing knobs for black-and-white televisions.

189. Familiar with railway electrification, contact line system, processes such as mechanics, plastics, founding, forging, molding etc.

190. Unreinforced, medium high viscosity polybutylene terephthalate resin for extrusion and injection molding.

191. Preforms are blow molded on conventional, unmodified blow molding machines, according to PTI.

192. In this paper, the present situation of the research on the numerical simulation of green sand molding and core making process was reviewed and the trends on this field were given.

192.

193. This research suggests that business managers could boost team performance by elevating the job satisfaction of the team members through personnel selection and molding leadership of the leader.

194. Simulation compress is used to study rheological behavior and major affecting factors of low density cornstalk fragment convex molding.

195. This machine suitable for plastic, leather, sponge foam, nylon, fabric, paper plate and various synthetical material, molding cut one or several layers.

196. Overlay it with gold and make a gold molding around it.

197. The base theory would be found though the study of plastic heated by microwave for the succedent rotational micro-wave heating molding.

198. ST14 drawing board with the bottom surface of rigid selection of SPCC steel, inlaid conductive molding around the edge.

199. Considerable amount of work has been carried out on the development of resin transfer molding(RTM)as a viable processing alternative to autoclaving molding techniques .

200. The casting technique with top gating system, outer shaped iron chill, compound casting mold and core assembly molding was used for producing aluminum impeller on a large scale successfully.

201. The end of integration of nature and virtue lies in molding the moral model and realizing full-scale and unstrained development of man.