1. Hastelloy - C Spring ensure excellent durability corrosion resistance.

2. Silicon bronze , corrosion resistance and high strength.

3. Optical Fiber Sensor Technology With anti-electromagnetic interference, corrosion resistance, flame proof and other outstanding advantages, began to be widely used.

4. Zinc plating chromic acid salt after the passivation, corrosion resistance can improve 6 to 8 times.

5. Adhesion, wear and corrosion resistance of the coatings obtained were compared with those of conventional bluing at room temperature.

6. The corrosion resistance time increases firstly, and then decreases with the increment of reductant content.

7. Furthermore, the flame resistance and corrosion resistance of the HETA resin areinvestigated systematically.

8. For optimum corrosion resistance, surfaces must be free of scale and foreign particles and finished parts should be passivated.

9. The effect of quenching agent on exfoliation corrosion resistance of 2519 alloy was investigated by means of hardness tests and transmission electron microscopy (TEM).

10. Silicon bronze corrosion resistance and high strength. Welding of copper silicon bronze and brass.

11. The investigation of corrosion resistance of epoxy coating containing pigment of zinc chrome yellow was made using electrochemical impedance spectroscopy(EIS) measurement.

12. Adhesivity between rubber and wire product, corrosion resistance as well as stability of lubricant were also determined.

13. Alternating current impedance and corrosion resistance of polymer coatings on sheet iron have been investigated in aqueous solution of NaCl with mass ratio of 0. 03.

14. Due to the heat resistance of varnish nitro wood, a corrosion resistance is poorly, when using, but also pay attention to the insolate, smoke.

15. With well-suited amount of Si 3N 4 added, the oxidation loss rate of aluminum-carbon bricks can be decreased, and their anti-oxidation ability and corrosion resistance improved.

16. Titanium and its alloys are widely used as biomedical materials in orthopedic and dental surgery because of their high specific strength, fatigue resistance, corrosion resistance and biocompatibility.

17. In order to meet the requirements of airplane engine impellers for high-temperature and corrosion resistance(), the structure of Ni-Cd alloy diffusion coating is studied.

18. The impeller of LGY axial flow fan adopts high-quality aluminium alloy, and has the characteristics of light weight, high-temperature resistance, rust protection and corrosion resistance.

19. Application of sherardizing steel is limited for bad erosion - corrosion resistance.

20. Casting aluminium alloy ZL305A is a new shipbuilding material with high strength, good ageing stability, excellent corrosion resistance.

21. Followly, the comparative analysis of the microhardness, metallographic structure and corrosion resistance of laser lap welding welds and resistance spot welding welds were conducted.

22. Head and cap are machined from ( 6061 - T 6 ) solid aluminum bar and anodized for corrosion resistance.

23. Phase composition of the barrier layer rusts of two alloy steels with different corrosion resistance in sea water was determined by conversion electron Mossbauer spectroscopy for the first time.

24. Compared with other inorganic fibers, BN fiber has the excellent properties of thermostable and chemical corrosion resistance, radiolytic stability, and electrothermal.

24. is a online sentence dictionary, on which you can find nice sentences for a large number of words.

25. PE pipes, being applicable to the mid-pressure gas pipe-line in the cities and with economics, corrosion resistance and security, will be popularized and applied.

26. Good weathering resistance. High temperature resistant, low temperature resistant, net easy to distort and jackknifing . alkailproof and acid proof , corrosion resistance, and insect pest resistance.

27. NR-ESC endeavors in supplying all kinds of excellent quality professional tools for engineer, including the 2B-SA nipper with high precision, corrosion resistance and high strength.

28. By looking into the case study of a Bridge toll gate being located in Quanzhou, this paper studies the corrosion resistance of the steel structure in marine atmosphere.

29. Based on the method of linear polarization, AC impedance and time potential, it is studied that the properties of seawater corrosion resistance of rebar in normal concrete and fly ash concrete.

30. By decreasing the current density in plating process, the width and depth of cracks of the electrodeposit are reduced and the corrosion resistance of the electrodeposit improves.

31. The corrosion resistance of direct electroless nickel on die-cast aluminum case of the electronic connector is bad.

32. The experiment result indicates that the technique is simple, operation is convenient, surface flat is good, the corrosion resistance and antipollution are strong.

33. PVC folding door with door physical light, heat, moisture, thermal insulation, fire retardant, sound insulation, acid and alkali resistance, corrosion resistance and chemical stability.

34. Corrosion resistance and high temperature anti-oxidation ability of alloy were remarkable improved by Sol - Gel ceramic coating.

35. After a suitable post-treatment, conversion film in bluish-white, iridescent or black colour accordingly and with excellent corrosion resistance is obtainable.

36. Aluminum Conductor Composite Core is a brand new conductor for overhead lines. Its advantages are light weight, high strength, good thermal stability, low sag, large ampacity and corrosion resistance.

37. Whether as-received or sensitized materials, the corrosion resistance of SAF?2205 stainless steels was superior to AISI?316L.

38. The rough chrome plating is for mating to other chrome plated equipment and additional corrosion resistance.

39. These cover glasses offer maximum clarity, superior corrosion resistance, and uniform thickness and size. They are free of striae and oily film.

40. The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti...

41. The coating does not come off after annealing at 750 degree with good interface resistance and corrosion resistance when the environmental protection is ensured.

42. The anodization behaviour of ECR alloy and 18 8 stainless steel in the saturated salt solution is analysed and both properties of local and total corrosion resistance are also compared.

43. However, cobaltous acetate of relatively high concentration in sol-gel coatings might undermine both the stability and the corrosion resistance performance of the coatings after immersion.

44. The result shows that the ocean corrosion resistance of HDQ is 2.4 times than that of HD (low alloy cast iron with ocean corrosion resistance).

45. Effect of pre-deformation and quenching agent on intergranular corrosion resistance of high strength aluminum alloy was investigated in this paper.

46. The effects of pulse current, frequency, duty ratio and inverse current in zincate system on the appearance and corrosion resistance of zinc coating are investigated.

47. Model 410 - martensite (high-strength chromium steel), good wear resistance, corrosion resistance is poor.

48. The corrosion resistance of Q235 steel in 10% sulfuric acid and rich liquid was studied after steel was treated through the surface nitridation titanium.

49. A selenious acid type solution of better performance was obtained by the test of polarization curve, the test of corrosion resistance and the test of duration life.

50. The composition, binding power, electrical resistivity and corrosion resistance of plating were analysed.

51. These cover glasses offer maximum clarity, superior corrosion resistance, and uniform thickness and size. They are free of striae and oily film. Circular.

52. The performance of industrial titanium, the structure feature of titanium mesh ripple plate demister, the manufacturing welding method and the corrosion resistance were recommended.

53. The effect of the desaturation aging (DSA) treatment on the strength and the corrosion resistance of ultra high strength aluminium alloys were studied.

54. The performance valuation and analysis was reviewed to the mechanics property, oxidation resistance, hot corrosion resistance, erosion resistance,[] and thermal property of thermal barrier coatings.

55. Erosion mechanism of ferruginous crucible for melting zinc was lucubrated, and several methods which can improve corrosion resistance and service life of ferruginous crucible were introduced.

56. Graphite has good lubricity and plasticity, chemical stability, to acid, alkali, corrosion resistance to organic solvents.

57. It power boasts excellent machinability , high corrosion resistance , gond weldability and conductivity.

58. All kinds of Pb-free surface treatment steel sheet for automotive fuel tank with better corrosion resistance were developed by many steel company in the developed country.

59. Its features are high density, high strength, high corrosion resistance, high thermal resistance and volume stability.

60. This paper investigated the static thermit SHS ceramic coating. The composition, microstructure, mechanical properties and corrosion resistance of the ceramic coating have been analysed.

61. Results indicated that wear resistance and corrosion resistance of black TiN coating were higher than that of black oxide film or phosphatizing films.

62. The product is manufactured with imported raw material and features high pressure and corrosion resistance.

63. The corrosion resistance of chromate passivation tinplate in neutral solution was reinforced, and the corrosion rate for sulfur and acid declined with the increasing of passivation tem...

64. Air-inlet grille: is made by adopting corrosion resistance PVC, and the double channel design can prevent and reduce a part of the algae forming within the machine set.

65. Lanthanon (salt spray) can be added into fasteners to improve their corrosion resistance, resistance to hot flashes performance and assembly performance.

66. Black TiN coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.

67. Moreover, this room-temperature self-crosslinkable TF elastomeric coating has a better advantage in bridging crake and corrosion resistance, and its comprehensive property is superior.

68. Corrosion resistance experiment: salt water spray experiment, experiment, sulphur dioxide experiment, nitric acid hydrogen sulphide experiment, etc.

69. Composite alloy coatings of intermetallic compound dispersed and distributed in amorphous alloypossess excellent corrosion resistance and abrasion performance.

70. This machine has the advantages of clear display, high precision, good performance, safe and reliable, easy operation. It is applied for testing corrosion resistance performance of material widely.

71. The results show that corrosion resistance of the stannate conversion coating pretreated as following process: acid pickled by phosphate first, then alkaline pickled by s...

72. After the replacement of lead damping pad by CF/ PTFE, the corrosion resistance, safety, reliability and service life of high-pressure air cylinder of submarine has been greatly raised.

73. These products have very compact structure , low apparent porosity , high refractoriness , and excellent corrosion resistance.

74. The aim of this study is to investigate the effect of cobaltous acetate doping on the corrosion resistance of sol-gel coatings on aluminium alloy LY12.

75. The treatment may homogenize, densify microstructure, and further more improve the surface corrosion resistance.

76. High - performance synthetic rubber , anti - high temperature , low temperature resistance , corrosion resistance.

77. AISI 316 stainless steel offers superior corrosion resistance due to the higher nickel and molybdenum content.

78. Gray iron has corrosion resistance that is improved over steel in certain environments.

79. High density polyethylene (HDPE) film have many advantages, such as high-strength, imperviousness, corrosion resistance, age resistance, convenient to construct, and so on.

80. Hardness, strength, fatigue resistance, wear resista nce, corrosion resistance, oxidation resistance, conductivity and optical property of material surface can be improved by ion implanting.

81. Ahab's alloy is a high ni high molybdenum alloys, in nitric acid chromic acid, sulfuric acid etc oxidizing acids has good corrosion resistance.

82. One of the most specified materials for corrosion resistance to sea and salt water, Monel is also very resistant to strong caustic solutions.

83. Anyone who is a industrial waste gas, waste gas fuel have pollution atmosphere, zinc coating the corrosion resistance than at sea or plating, cadmium in the ocean in the opposite.

84. The best corrosion resistance of the coatings after salt-fog test is micaceous iron oxide epoxy coatings followed by iron red epoxy coatings,[http:///corrosion resistance.html] and zinc-rich epoxy coatings.

85. This paper investigates improving corrosion resistance of AZ 91 magnesium alloy surface by permeating rare earths.

86. Silicon bronze, corrosion resistance high strength. Welding of copper, silicon bronze brass.

87. This machine has the advantages of high balling strength, good looking, corrosion resistance, wear resistance, low energy consumption, long operational life span, easy operation and repair, etc.

88. Factors influencing corrosion resistance of galvanized steel-wire in continuous plating process and measurements to be taken were described.

89. The result indicated that the optimum dispersant was FSJ-502, moreover, after adding the talc into the paint, the dryness, after-tack, hardness and corrosion resistance of the coating are improved.

90. The present invention aims to offer a lubricating composition with excellent heat resistance, mechanical stability, water resistance, corrosion resistance, load resistance and flame resistance.

91. It had good corrosion resistance, better synthetical mechanical properties and casting properties.

92. Corrosion resistance : except for corrosive salt area and sulfurous area.

93. Several electrochemical determination methods to test the corrosion resistance of coated metals were described, such as DC resistor, AC resistor, potential time and charging curve.

94. Compared with other methods, FRP strengthening systems have the merits of high strength, high active, ease of application and good corrosion resistance and so on.

95. The latter layer provides corrosion resistance by supporting the lubricant.

96. Results showed that ACM coating retarded the formation of white rust on the galvanized steel and the corrosion resistance of coating was closed to that of the chromate conversion coating.

97. Column hard chromium plating, wear resistance, corrosion resistance and longer life.

98. Mineral composite could greatly improve the chlorion penetration resistance and the sulphate corrosion resistance by filling up the pores in concrete.

99. A plate heat exchanger having an excellent sea water corrosion resistance is also provided wherein the aluminium alloy material is used as a heat transfer unit using sea water as cooling water.

100. Chromium electrodeposit with high hardness, wearability, corrosion resistance and distinctive appearance was widely applied in electroplating sector.

101. Thesurface hardness, corrosion resistance, abrasion resistance and light fastness as well as the surface colour of metals can be improved through oxidizing and Colouring processing.

102. It is shown by comparison of properties of various conducting wires that Al cladding steel wire have good properties in respects of corrosion resistance, conductibility , tensile strength and etc.

103. The corrosion resistance of 07X16H6 precipitation hardening stainless steel in tempered state was studied using high temperature oxidation, salt-spray test and stress corrosion test.

104. In this paper, enhancing the burning point and improving the corrosion resistance and the mechanical property of magnesium and magnesium alloy with the method of alloying are introduced .

105. The structure and corrosion resistance of 8 # new zirconium alloy are studied.

106. It has high and low temperature resistance, corrosion resistance, non-absorbent and other excellent features.

107. Effects of quenching agent on the polarization curves and intergranular corrosion resistance of high-strength aluminum alloy were investigated in this paper.

108. Epoxy glass flake coating and daub offers excellent anti-permeability and corrosion resistance. They are small in residue stress and easy in construction.

109. The corrosion resistance and weatherability of color polyethylene coated steel pipe were investigated.

110. A homogenous and dense film of PAn coating electrode of stainless steels has better corrosion resistance.

111. Tin and its alloy electroplating have been widely adopted in electronic industry for their excellent corrosion resistance and solderability .

112. The use of acid-base and humid environment on the corrosion of metal plating layer to test the corrosion resistance.

113. Effects of technological conditions on sealing quality , uniform colour , corrosion resistance are analyzed. Ways of getting excellent electrolytic colouring quality are discussed.

114. I plant of the chromium oxide , alumina ceramic coating and has a tungsten carbide metal-resistant coating wear, corrosion resistance, high temperature,[] and other fine performance.

115. Excellent corrosion resistance with ESR - melted. 13 Cr - Mo stainless steel with high hardness.

116. Advanced tests like corrosion resistance to molten aluminium, thermomechanical properties, thermal conductivity and microporosity are discussed in respect of application areas for Bonite.

117. Silicon bronze has equal or greater corrosion resistance to that of copper.

118. It has character of corrosion resistance peeling off resistance and good thermal shock resistance.

119. Backflow preventer manufactured from 300 Series stainless steel for corrosion resistance.

120. It power boasts excellent machinability, high corrosion resistance, gond weldability conductivity.

121.

122.

123.

124.

125.

126.

127.

128.

129.