1. The unit of kinematic viscosity is the stoke.

2. Optimized design; Fuzzy; Robust; Kinematic Pair Clearance; Spring Actuator.

3. The similarity includes geometric similarity,(Sentence dictionary) kinematic similarity and dynamic similarity.

4. Based on the kinematic relationship of regrinding, a mathematical model was established for the chisel edge regrinding and the solution of grinding parameter was obtained.

5. The kinematic analysis of the planar four-bar linkage and dimensional six-bar linkage can be done by building up the structural equations.

6. The paper presents a matrix representation method for kinematic schemes of mechanical products.

7. The dimensional synthesis problem of Open Kinematic Chain(O. K. C)is studied.

8. This paper presents a complete nonlinear spatial kinematic, model of a car steering mechanism with a trapezoid and a Macpherson strut.

9. The spectrum classification method for planar kinematic chain with multiple hinges was put forward by taking this as a base, and the relevant algorithm was presented.

10. The kinematic analysis and dimensional syn-thesis Problems of robots are studied.

11. The mathematical property of the limit point in kinematic path is clarified.

12. A telescopic kinematic link is used for avoiding the device damage caused by over-large resistance of the penetration tool.

13. As an example, the driving and kinematic pair forces analysis of a 3-DOF planar parallel pneumatic and hydraulic Linkage are obtained in the given kinematic condition of the linkage.

14. In the D-H coordinate, direct kinematic model and inverse kinematic model are built based on the homogeneous coordinate conversion, and this provides the foundation for gait plan.

15. This paper analyzes kinematic features and design characteristics of cantileverdrill - jumbo's loading unit by complex number - vector method.

16. In this paper, we establish dual kinematic formulas on translative integral geometry by using dual mixed volumes.

17. This paper represents the basic principle of kinematic analysis of planar mechanisms carried out by using the vector loop equation.

18. It is proved that the actively compensating platform based on hybrid serial-parallel mechanism is of kinematic feasibility for deep ocean mining.

19. It is a direct method for getting a reciprocal solution formula of velocity and acceleration by ingenious treatment of maths, meanwhile, the kinematic analysis of the mechanism are also simpler.

20. Absolute and relative measurements have been suggested, the latter including relative measurements of absolute viscosity and kinematic viscosity.

21. Summary of Background Data. To our knowledge, few reports have described the kinematic relationships of the upper cervical spine in patients with general age-related cervical spondylosis.

22. In this paper, parametric variation method is used in kinematic equation of series excitation direct current motor with different turning velocities.

23. Secondly, mechanism analysis of all drawings will be carried out, including topological analysis, kinematic analysis, and computer simulation.

24. It is shown that the optimal method can effectively prompt the kinematic stability of epicyclic belt transmission, and may be the most effective means in designing epicyclic belt transmission.

25. The studying results show that the classical elastic wave equation of spherical wave is only true for fixed amplitude phase and described only kinematic equation of phase velocity.

26. And it also got Jacobian matrix by using the speed superposition principle through regarding mobile platform as Generalized Kinematic Pair.

27. The(aeolotropism) and Bauschinger effect resulted from plastic deformation under cyclic loading were reflected by the kinematic hardening model in the SFEM.

28. A material with plastic prestrain shows the property of strain hardening such as isotropic hardening, kinematic hardening or mixed hardening.

29. The swing curve of guide bar on RD6DPLM/12 3 double needle bar warp machine is given by means of kinematic analysis and the use of self designed kinematic analysing software kits.

30. A formula of rebound distance based on coefficient of restitution was deduced through kinematic analysis of raw coal(mixed gangue) in the process of oblique-impact.

31. Kinematic analysis by using base vector method for the swing linkage of X type train is presented in this paper.

32. In the paper, the kinematic analysis of planar linkages has been solved by the analysis of several basic groups of bars .

33. Moreover,(http:///kinematic.html) kinematic optimization and simulation are carried out by setting the smoothness of joints' velocity variety as optimization objective and discriminant of collision as constraints.

34. A lubrication equation is derived of kinematic pair of the moving tooth-guidance for moving tooth transmission of push rod style.

35. Due to their specific kinematic behaviour, cylindrical roller thrust bearings are only suitable for low speed applications only.

36. The autotest system for kinematic viscosity proposed in this paper has implemented the automation in temperature control and liquid surface measuring.

37. The main reason to discard the lubricating oil in use for railway locomotive diesel engine lies in its (kinematic) viscosity beyond limiting value.

38. On the basis of kinematic analysis of rotor and gimbal guideway, the rigid body kinematic models of single rotor and rotor with the gimbal guideway were derived.

39. In this paper, a natural coordinate method suitable for the computer kinematic analysis of multibody system is introduced.

40. Based on the graph theory, a graph representation is proposed to represent the kinematic structure of the differential steering efficiently.

41. Kinematic relations of the coordinate systems on links are reduced to recursive form.

42. Matrix transformations were used to establish the kinematic equations of the firing mechanism.

43. Establish virtual prototype of this platform by using ADAMS, analysis its kinematic and dynamic characteristics.

44. In addition, some skills have been shown when applying the new modular method to kinematic analysis for parallel manipulator, which is of advantage to improve computing efficiency.

45. In the end, this method is also applied to research of end effector kinematic characteristics of parallel robot with compound chains, and the concrete expressions are given too.

46. The type of base mechanism is limited, and its kinematic analysis is very simple.

47. GMECH s upports kinematic analysis and reverse kinematic and analysis certainkinetostat ic analysis.

48. Diagnostic Study of Jet Streaks: Kinematic Signatures and Relationship to Coherent Tropopause Disturbances.

49. The identifiability of geometric parameters of 6-DOF parallel kinematic machines is studied using a subset of pose error data.

50. Based on the non-linear kinematic wave method, a technique using the four point, excentric, implicit, finite-difference numerical scheme to simulate the urban storm sewer system is introduced.

51. According to movement of piston in hydraulic rock drill, the deferential equation on piston was set up and its kinematic parameters' formula was deduced.

52. In this paper some geometric and kinematic features of a plasmon which is expanding and ejected both relativistically are discussed.

53. To obtain the kinematic and dynamic characteristic of planar 3-RRR parallel robot with elastic inside links, operating at higher speed, a kinetoelasto-dynamic(KED)model is proposed.

54. The method for designing the cutting structure of a mono-cone roller bit is discussed on the basis of geometric and kinematic analyses of the bit.

55. The kinematic state space representation and its corresponding control equation of the ice - skater robot were presented.

56. The spectrums of degree, structural component and multiple hinges are defined according to the basic parameters of planar closed kinematic chain with multiple hinges.

57. So, the intense neotectonic movement and seismic activity on the eastern margin of Altai Mountains are related to the collision of India-Eurasia plate and maybe to the regional kinematic process.

58. This paper will also offer theoretical basis for the modular design of more complex kinematic chain.

59. Automatically building kinematic model of robots with multiple joints is a key problem to be solved in robot simulation and off-line programming system.

60. The performance of the counter-flow drier is effected seriously by the kinematic parameters of the sweep auger, especially the revolution speed.

61. This paper presents the first and second order kinematic analysis of the three degree of freedom 3 RPS parallel robot mechanism.

62. Although a planar pair might theoretically be included, this would impose no constraint and thus be equivalent to an opening in the kinematic chain.

63. A kinematic model of the planet lapping machine is developed.

64. It specifies the establishment of the kinematic equations and the Jacobin matrix. It also gives a detailed discussion on the singularity of the mechanism.

65. The remanent displacement method is presented in this paper using the kinematic inversion for position analysis of over two-grade Planar Linkages.

66. All of available configurations of the single joint kinematic chain are gotten by replacing its pairs.

67. The kinematic and dynamic features of the Enshi fault in the 3 main deformational phases are analyzed by means of the striations on fault planes,(http:///kinematic.html) conjugate joints and microstructure in fault zone.

68. Kinematic dynamic parameter tester and a kind of grating transducer developed recently are presented.

69. We established a kinematic model of the long-based undulatory fin on the basis of analyzing the long-based dorsal fin locomotion and considering the fluid-structure interaction.

70. This paper presents a new method with driver transformation for the kinematic analysis of the planar mechanisms in high class, based on the Assur group theory and kinematic superposition principle.

71. Counterforce and balance force in real kinematic pair are found by step-by-step approximation.

72. Kinematic analysis is carried out for the first time on constant-breadth arc cam mechanisms with oscillating flat-faced follower by the method of replacing higher pair by lower pairs.

73. Mechanical movement is the subject of theoretical mechanics research, including statics, kinematic and dynamics.

74. The motion error of the tripod universal joint is analyzed on the basis of kinematic analysis.

75. Finally, the shakedown problems of rotating disks of such materials under isotropic and kinematic hardening conditions are discussed.

76. This paper presents the kinematic analysis and the optimal design on the combined mechanism of double universal joints gears and the oscillating guided bar mechanism with three slides.

77. However, elastic kinematics model to simulate the kinematic and found that this calculation error is not significant.

78. According to the actual structure of a electric automobile rack and pinion steering system, kinematic equation of the steering mechanism is deduced.

79. The workspace factor is a important performance evaluation criterion of parallel kinematic machines.

80. Using software ADAMS, kinematic analysis, kinetic analysis, and optimal design of this mechanism was fulfilled.

81. This paper introduces kinematic analysis of planetary gear-geneva combined mechanism.

82. Based on the established kinematic model, the principle of the key pole length is proposed to avoid the cavum phenomena in the measurement range.

83. With the kinematic model of satellite's attitude applied, the estimate models of attitude determination based on Euler angle method are presented.

84. The problem of target identification based on kinematic data provided by shipborne 3D radar is studied.

85. In addition, the conditions of crank for RSSP linkage are derived. The method of kinematic synthesis of RSSP linkage which can realize quick-return motion also be deliberated.

86. The kinematic chain type of the seven-bar mechanism was deduced base on the type of kinematic chain of the six-bar mechanism and the appropriate configuration was chosen.

87. The tooth contact and kinematic precision of the modified worm gearing with manufacturing errors has been investigated by the TCA method.

88. Kinematic hardening model was used in FEM analysis and the response behaviors of transient local stress strain for material was also considered.

89. The thrust and propulsive efficiency of the long-based fin undulating can be analyzed by applying the derived kinematic model and the equilibrium equations of the undulatory fin.

90. Dynamic and kinematic characteristic and preliminary model reference adaptive attitude control system of the rocket initiative attack mine are studied in this thesis.

91. This work develops kinematic, dynamic and integrated design approaches for variable-input-speed plate cam mechanisms. And, an experimental setup is built for verifying the theoretical design models.

92. The wearing depth distribution of different contact positions of typical kinematic pair is discussed.

93. Kinematic data were obtained from the fluoroscopic images. Kinetic data were derived based on an inverse dynamic model of the entire cervical spine.

94. The analysis of the positions of planar link mechanism with high class groups is a difficult problem in the kinematic analysis of mechanism.

95. Link A link is one of the rigid bodies or members joined together to form a kinematic chain.

96. Theswing test bench is the key equipment for many tested system and kinematic simulation.

97. Secondly,(http:///kinematic.html) it develops the tank's kinematic and dynamic analysis method and terrain match method.

98. Kinematic analysis showed that they also had improved control over their fingers and were quicker at all test tasks.

99. When a basic kinematic chain reaches a singular configuration, the complex linkage is at a singular position.

100. The kinematic equations of the mon-linear resistance network are solved with graphic method by elimination and substitution in order toc determine the operating spot , DP chart and TC chart.

101. A calculation is made. to the radial feed kinematic link, it also gives the calculated result for change gear.

102. An optical fiber is coupled to two or more links in kinematic chain.

103. Target moving element is given through calculating sonar data, then its kinematic rule is imitated with uniform straight line motion.

104. The design of the schemes of the parallel drive and serial-parallel drive turning-and-millingmultiple NC machine tools and kinematic emulation analysis have been studied in this paper.

105. Because of the limitations of the method for kinematic analysis and efficiency calculation of planetary gear trains(PGTs), a graphic method was proposed.

106. In this paper, a matrix method is used to analyze the kinematic influence of structural - errors on the motion of beat-up and weft insertion system of a rapier loom.

107. Graphic solution and analytical method are the major methods in kinematic analysis.

108. By the partial optimization to the robot with a sphere-wrist, the kinematic accuracy of the end effector of the whole robot can be increased to some extent.

109. This article analyzed the kinematic and dynamic characteristics of cam chain wheel gearing, and put forward the vibrancy equation, speed equation and acceleration equation of cam chain wheel.

110. Based on type synthesis of the planar seven-bar kinematic chain, this paper put forward four kinds of basic kinematic chain and four kinds of derived kinematic chain.