1. The GM diesel engine shunted the coaches to Platform 4.

2. Is it possible to fit a diesel engine and an auto gearbox without being too expensive?

3. Because the diesel engine uses so much less fuel it releases substantially less carbon dioxide into the atmosphere.

4. At the kerb the taxi's diesel engine idled noisily as a passenger's face peered uncertainly through the window.

5. The blend of executive car and diesel engine works extremely well.

6. Finishing the regular technical maintenance of diesel engine.

7. The diesel engine is reliable and longlasting.

8. Specialized in Diesel Engine Generator for nuclear power plants.

9. Lesson 3 How Does A Marine Diesel Engine Work?

9. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

10. The scraper is powered by a diesel engine.

11. The propellar blade is powered by a diesel engine.

12. The tractor is powered by a diesel engine.

13. Diesel engine oils typically meet the '15W' requirements giving protection to -15 degrees Centigrade.

14. As a result, particulate emissions from automotive diesel engine may be controlled also.

15. I have noticed that your opinion of the 2.5 litre turbo diesel engine is not good.

16. It's gone for a big six-cylinder, turbocharged 2. litre diesel engine under the bonnet.

17. These will be electronically controlled, a technical task far harder on a diesel engine than on its petrol counterpart.

18. The group plans to spend $ 500m expanding the existing diesel engine plant, creating 500 jobs in five years.

19. The huge Dagenham site is to become Ford's centre for diesel engine manufacturing and design.

20. Although over the moon with it generally, I am disappointed with the lack of power in the naturally aspirated diesel engine.

21. The other, sure to be more popular, is a brand-new turbocharged diesel engine developed by Land-Rover.

22. I would love to test the same rig with a turbocharged diesel engine.

23. A simple method of grading the internal combustion engine noise by its sound power level is adopted to compare the noises of 4100QBZL diesel engine with cooling fans of different diameters.

24. This paper describes the experiment on selection of plasma spraying materials for the cylinder sleeve of diesel engine.

25. This paper introduces the main functions, hardware configuration and software design of the autotest desk on diesel engine.

26. Question: What concentration of additives might be found in typical diesel engine crankcase oil?

27. The relationship between calcium stearate and sand core as well as casting quality of cylinder head of diesel engine for example is analyzed.

28. The air-fuel ratio, smoke opacity and in-cylinder pressure of MWMTBD620 diesel engine under increasing power transient operating conditions were tested by a home-made control and measurement system.

29. According to the needs of practical engineering, different type of flow meters may be used to measure the fuel consumption rate in fuel pipeline of diesel engine.

30. An Experimental Investigation in the dynamic stress of scavenging pump driving train of a two-stroke diesel engine has been carried out.

31. Finally, the optimum piston skirt profile of 135 diesel engine is made as an example.

32. In view of requirement of locomotive diesel engine starting, the authors analyzed the defects in design of start controlling circuit for DF_(4B) locomotive diesel engine and proposed solutions.

33. Combustion noise contributes a major part to diesel engine noise.

34. Using this verified model, we studied the injection advance angle's influence on the performance of this diesel engine. The results can provide the theoretical basis for following study.

35. In this paper, large alloy iron parts and low-alloy steel parts after surface heat treatment, used in the diesel engine , were tested and compared. By Leeb hardness sclerometer.

36. "Derating" is one of the different approaches to reduce SFC of a diesel engine.

37. Rudolf Diesel is the German inventor of the diesel engine.

38. The FEM for the assembly parts of piston, gudgeon pin and small-end of connecting rod is constructed to investigate a diesel engine piston with an oscillating-oil-cooling channel.

39. General steps of tolerance analysis and tolerance optimization were provided. To verify the effectiveness of the approach, connecting rod structure and piston structure in diesel engine were tested.

39. is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

40. The cleaning strainer base of 280 diesel engine in low pressure casting was discussed.

41. Finally, this paper investigates reasonable match from the diesel engine cooling system radiator and fan, proposes several methods to improve the cooling efficiency from structure optimization.

42. The limit values of type 16V280ZJA diesel engine were determined by means of quality control chart based on plentiful monitoring data.

43. In diesel engine industry, the development of small cylinder bore and several cylinder bores diesel engine and spare parts is supported.

44. The test stand-by for studying the transient performance of the diesel engine's turbo-charging system was established based on D6114 diesel engine.

45. I. Name of Project: Gasoline Engine and Diesel Engine Turbocharger Production Line.

46. Combining theory calculation with factual ship experience the author, discuss the change of marine diesel engine cooling system in Yellow River and the choosing of respect parameter.

47. The phenomenon of 16 V 240 ZJD diesel engine hunting at major repair is very serious.

48. With the optimized process parameters, the diesel engine casting mould was manufactured by prototyping machine scanning by laser point, then assembled and tested on the moulding board.

49. Several important tests on torque - angle tightening process of diesel engine cylinder head bolts were introduced.

50. A new method to determine mechanical efficiency of diesel engine by acceleration deceleration method under non external load is proposed.

51. And the performances of new type ashless dispersant in gasoline engine oil and diesel engine oil were also presented.

52. To reduce the main pollutant of the diesel engine(particle and NOx), this paper designs the automatic controller by using the bag filter and Exhaust Gas Recirculation technology.

53. Without any changing at the configuration of DL190-12 diesel engine, it studied the power and fuel economy performances when supplied with ethanol-diesel blended fuel by experiment.

54. The reliability of main bearing and connecting rod large end bearing for 12V240ZJ diesel engine whose power has been increased up to the E type grade was analyzed.

55. The present invention provides a new lubricating oil composite for diesel engine.

56. The structure of one kind of diesel engine test-bed is introduced in this paper. The depiction's emphasis is the hardware and the software of its control system.

57. Based on the tests of residual stresses in diesel engine cylinder blocks, treating effect of heat aging and vibration aging on eliminating residual stress has been analyzed.

58. Based on the performance of diesel fuels in diesel engine, the cetane number was predicted by the determination of autoignition temperature.

59. This paper describes the design features of a test bed for diesel engine combined with hydraulic torque converter and represents the test specifications and the processing of measured data.

60. An application example ship diesel engine is presented in detail.

61. Bench test and research work are carried out for the model J6110Z Diesel engine matched with movable sleave structure adjustable turbocharger (model VGT - 70).

62. So for a diesel engine failure diagnostic study more certain significance.

63. The diesel engine was named after its inventor Rudolf Diesel.

64. The reasons include inappropriate maintenance, component failures, filter blockage, bad crankshaft bearing shells, inappropriate fit clearances, abnormal diesel engine vibration and etc.

65. It can measure the oil film thickness, oil temperature, crank angle, speed, journal center locus and minimum oil film thickness of main bearing in diesel engine.

66. Applying CFD to simulate the fluid field of a inlet port in a kind of 385 diesel engine, and with 3D analog computing as well, we analyze these results and prove its effectuality.

67. The crankshaft brush plating procedure was formulated which was used for repairing a L195 diesel engine crankshaft. The durability of various operating mode was tested on a hydraulic dynamometer .

68. In the article, the reasons for cavitation erosion in cylinder sleeve of 135s diesel engine are analyzed, and several suggestions to against cavitation erosion are given.

69. The vessel to be propelled by a single-acting two stroke supercharged cross head Diesel engine,(http:///diesel engine.html) acting to a fixed pitch propeller .

70. Do you think diesel engine is a trend for future car development?

71. Apply to Citroen, Kia, Big Dipper, AJ, Chollima sections of the world, such as cars but also for applications that require the application of CD diesel engine oil level of the various trucks.

72. We can overhaul and provide spare parts, rotor dynamic balancing test to the various types of marine diesel engine supercharger, and provide a variety of operating parameters.

73. This advantage prevents the diesel engine from replacing the gasoline engine in some automobiles and airplanes.

74. The main diesel engine is the most valuable and necessary equipment integrated into a civil ship, and its reliability has a direct and economical impact on a ship operation.

75. Water simulation model for 495 A diesel engine block casting is completed based on the similarity theory.

76. In this paper, the design basis, calculation method and construction feature of the new type composite oil ring with helical spring used in the medium and high speed diesel engine are described.

77. An integral contact model was established to analyze the cylinder bore deformation of model 493 automotive diesel engine.

78. From the viewpoint of reliable operating of diesel engine, the load fluctuation and control requirements of marine propulsion diesel engine in unsteady conditions are briefly discussed in this paper.

79. A diesel engine has been converted into a spark ignition CNG engine.

80. The metallurgical quality of cylinder block head of D 114 diesel engine was analyzed.

81. This kind of air-cooler is applied in DF 4 , DF 5, DF 7 diesel engine etc.

82. The test results show that, without obvious increase of volumetric efficiency, this system is able to make obvious change to the exhaust gas emission of diesel engine.

83. Because color stop, we can only become a factory old diesel engine, around-the-clock rotary, issued a rumbling sound, go round and begin again for the oil burning.

84. With the increasingly improved structural performance of diesel engine, the performance of the electronic-controlled system has become an important factor affecting the performance of diesel engines.

85. Many blow holes exist in 495 A diesel engine block casting.

86. On the basis of modern theories of vibration, KED analysis and finite element method, a kinetic model of piston-linkage mechanism of XN2110 diesel engine was set up by I-DEAS software of SDRC USA.

87. Also the power rating and application of D683 high-speed diesel engine is introduced.

88. Based the modified program, the numerical simulation on the combustion process and emission characteristic of the CA6DL1-30 turbocharged diesel engine is carried out.

89. In this paper a mathematical model is used for calculating mechanical efficiency and mechanical loss of direct - injection diesel engine.

90. The difficulty about designing the turning fixture of gear case cover of air cooled diesel engine lies in the bob weight equilibrium calculating.

91. The vessel is to be single fixed pitch propeller propulsion with one (1) low speed diesel engine located aft.

92. The effects of cycle - by - cycle variation on the ethanol Homogeneous Charge Compression Ignition have been investigated in a single cylinder engine modified from a CA6110 diesel engine.

93. The flow field in the swirl chamber of a motored diesel engine was measured by Laser Doppler Anemometry (LDA).

94. The development process and overall design of NT 12 V 135 ZLDH generating set diesel engine are introduced.

95. Various motive equipments: Diesel engine, oil engine and electro - mechanical equipments etc.

96. The conclusions are of benefit to the improvement of the diesel engine with integrated cylinder head.

97. The paper reports the results of an investigation of the characteristic of combustion pressure oscillation in a D. I. diesel engine and their effect on engine noise.

98. Malfunction diagnoses for the diesel engine fuel system are introduced and given some typical obviating methods.

99. With the experimental method of photoelasticity,(/diesel engine.html) this paper has justified the results of optimum programming by finite-element method of clutch's shifting yoke of 42-160 diesel engine.

100. The experimental method of this paper is firstly to do an interactive experiment between DME and diesel fuel to prove that the blended fuel can meet the diesel engine requirements.

101. The influence of flow coefficient changes on ZH 1105 diesel engine is studied in this paper.

102. At present the main impetus to the Weifang Diesel Engine parts production.

103. The theoretical basis and calculating methods are presented for the design of oval piston skirt of SL105 eerie, diesel engine.

104. Lead new product development of diesel engine which includes technical document preparation, BOM set up, operation instruction preparation and project management, etc.

105. Through the investigation into the calibration system of an electronic-controlled diesel Engine, the software and hardware, which must be provided for those engines, have been presented.

106. In this paper, a grinding experiment on a piston skirt profile coated with compound material in a high-power locomotive diesel engine is carried out under a rating condition.

107. Do you need special tools for dismantling the diesel engine?

108. The hydraulic dynamometer consuming the dynamic energy of the diesel engine with water power can accurately measure the torque and the rotational speed of the diesel engine.

109. The invention discloses a diesel engine four air head gravity casting mold and its molding method.

110. J 56 Turbocharger passed full - speed full - load reliability test in 4102 diesel engine.

111. The damper is tested on an inline 6 cylinder turbocharged direct injection diesel engine.

112. The variation of no-load deceleration process curve of the diesel engine is affected by the lubricating-oil temperature.

113. The paper introduces the fault phenomena of cylinder gasket destroyed in diesel engine in application, analyzes and researches the reasons and mechanism which cause the fault.

114. Group core business to engine block, diesel engine, fan - based mechanical components manufacturing.

115. PC032 Pressure Sensor: It can test manifold absolute pressure of diesel engine, provide the signal to ECU, then control the lasting time of the fuel injection.

116. The frequency stability of a ship power station is decided by the speed response characteristic of diesel engine speed regulation system.

117. The cylinder head water jacket of a high speed diesel engine is analyzed by using CFD technology.

118. The test on the(influence) of changing fuel supply advance angle on fuel economy was carried out on single cylinder diesel engine separately using diesel fuel and ethanol-diesel blend fuel.

119. Based on deductive inference from mathematic model and practical measurement on site the method for evaluating the balance of horizontal single cylinder diesel engine is presented in this paper.

120. The relationship between calcium stearate and sand core as well as casting quality of cylinder head of diesel engine for example ...

121. Test results from the R100 diesel engine show that the optimized fuel injection nozzle angle can improve the fuel consumption rate and emissions effectively.

122. The technological trials of resin sand on hot box are performed in Nanchang Diesel Engine Works.

123. A new way to simulate combustion temperature and further for pollutants in direct-injection diesel engine is presented.

124. This paper applies BP neural networks to the fault diagnosis of turbine supercharging system of diesel engine.

125. This paper introduced an imitation debugging system for the remote control set of middle speed marine diesel engine.

126. Grey theory approach to the measurement and control system of diesel engine test platform is introduced.

127. In using the model DC6105 diesel engine, connecting rod cracks and its small end bushing breakdown are occasionally happened.

128. Diesel engine: Internal-combustion engine in which air is compressed to a temperature sufficiently high to ignite fuel injected into the cylinder, where combustion and expansion activate a piston.

129. The diesel engine is a mechanical power, it plays the leading role in machinery.

130. Mandated reductions have forced manufacturers to reexamine the diesel engine combustion process to discover answers.

131. Detailed measuring point layout schemes and test methods for the different parts directly contacting with combustion gas are introduced and tests on diesel engine CA6DF1-27are done.

132. The match test is completed between a double tongue - boards turbocharger and 6130 ZQ model diesel engine.

133. Theoretical principle and practical application are demonstrated by a 4105Q diesel engine as an example.

134. The diesel engine brake electric control system based on the CAN technology is introduced.

135. Cetane Number ( CN ) of diesel has effect on cold startability and emissions in a diesel Engine.

136. This paper analyzes the common fuel line malfunctions of diesel engine and gives the removal methods.

137. It is shown that what the combustion light intensity of diesel engine reflected is the oxidation course of carbon particles in flame.

138. Conmins Diesel Engine applied in ships gradually tend to be popuolarized.

139. The objective of this thesis is to study intake and exhaust system of turbocharged diesel engine and matching between each component by theoretical and simulation methodology.

140. As a key link of last process in production, the importance of diesel engine running-in on test bed has been approved owing to vital effect on the safety, reliability and lifetime.

141. The failure analyses were conducted on a diesel engine crankshaft made of ductile cast iron, which was nitrided. The fracture occurred at the web between the 1st crankpin and 2nd journal.

142. In this paper , the mathematical model for the simulation of the fuel injection system of diesel engine has been set up along with the concept and methodology for the object-oriented system design.

143. Aftercooler uses engine coolant to cool the compressed air from diesel engine turbo charger. It's applications include heavy-duty vehicles, vessels and generator sets.

144. The paper bring forward the scheme of calefaction to heavy oil by the cooling water of diesel engine according to the actual condition of locomotive, so that the viscosity be controlled.

145. Fitted with Cummins NTA 855 - C 360 turbocharged diesel engine powerful and remarkable perfectly.

146. Robust PID algorithm based on closed-loop gain shaping algorithm is presented in the paper, it is applied on the control of diesel engine for ships.

147. Application study is made by starting with variant frequency the diesel engine set of diesel locomotive.

148. Our company is specialized in series of diesel engine, electric fuel pump, oil injection nozzle, start machine and accessories used for cars and light duty trucks.

149. Furthermore, we provide various formed cutters for suppliers of auto, motorcycle engine, diesel engine, inhibited oil engine, mould, sewing machine, etc.

150. In this paper, reliability life test of 190A diesel engine was carried out using the theory of random failure process model of repairable system.

151. Based on application feature of domestic locomotive diesel engine and successful foreign experience, the fuel supply system in shunter diesel engine was updated.

152. It introduces a type of dry cutting diesel engine valve PCBN tool.

153. In order to meet the more and more high reliability requirement, it is necessary to study the structure of injection nozzle and delivery valve in the locomotive model 16V280ZJ diesel engine.

154. This paper uses Arbitrary Lagarangian Eulerian Method to model the air motion inside the cylinder of direct injection diesel engine.

155. It is proved that three pulse system is suitable for mid-speed diesel engine with high boost pressure.

156. Non-thermal plasma is a brand-new aftertreatment technology for diesel emission control, which may be a promising aftertreatment for simultaneous control of diesel engine emissions.

157. This paper designs a microcomputer system of the performance of the test block of a single cylinder for diesel engine. It can collect and treat all kinds of test data.

158. Being applicable for gasoline and diesel engine Fine abrasion proof elements prevent engine from being damaged in the cleaning process.

159. The similar diesel engine is used by the French La Fayette class frigate.

159. is a sentence dictionary, on which you can find nice sentences for a large number of words.

160. At last, take water-jacket of 226B diesel engine as practical engineering application, the void fraction and the velocity filed of the water jacket were calculated.

161. It is driven by a 200 - horsepower, John Deere Tier II diesel engine with an electric starting system.

162. A microcomputer-controlled measuring control system has been developed specially for measuring the diesel engine of electric-wheel truck used in open-pit mine.

163. The frequency stability of a ship power system is determined by the speed response characteristic of the diesel engine speed regulation system in the ship power station.

164. The safety switch controlling the ignition circuit in gas engine and flameout magnetic valve in diesel engine is used in air brake system to realize the automatic protect.

165. It is significant for locomotive diesel engine to burn low cetane fuel.

166. The utility model discloses a rotary ploughing complete machine which comprises a machine body, a diesel engine, road wheels, a gear case and an armrest.

167. The influence of injector nozzle four orifices flux distribution on fuel spray and ZH1105 diesel engine is studied.