1 The last topic discussed is the measurement error in the money stock data.

2 There are two main sources of measurement error which reduce reliability.

3 As a result, measurement error will be further minimized.

4 Measurement error is obtained by comparing the designed trajectory and the simulated one.

5 What is the impact of measurement error and impurity type on temperature compensation?

6 Experimental results show that the voidage measurement error of the new method is less than 8% and the real-time performance can satisfy the field requirement.

7 Analysis of the measurement principle and measurement error, and gives consistent with the theoretical analysis results.

8 Using the linear model with measurement error paddy production was estimated by means of NDVI.

9 By the proposed method the measurement error might be less than 0.01 pixel for noise free images.

10 The measurement error model of microwave two-port network S parameters is set up.

11 Conclusion Linear Measurement error model is an effective way to cope with measurement error.

12 The maximum measurement error is less than 5% for the Venturi tube with a throat-to-inlet diameter ratio of 0.71.

13 The measurement error of differential absorption laser radar caused by the shift of its center frequency in measuring atmosphenc density has been discussed particularly.

14 At last , the measurement error with mutual inductor is analyzed.

15 A component of this measurement error comes from the quality of the VNA calibration.

16 If these impacts are severe then alternative methods of analysis which are more robust to measurement error will be sought.

17 Similarly,() repeated measures may each contain a degree of measurement error.

18 Theoretical analysis indicated that using the revised three-color temperature measurement method based on CCD could effectively decrease the temperature measurement error.

19 Random noises have uniform rules and they comprise of circumstance noise, measurement error and ground microseism.

20 By synthesizing twice MTD results, actual velocity of the target is gained. Relation between pulse duty ratio and velocity measurement error is deduced.

21 The result shows that the algorithm has good real-time performance and that positioning precision is more sensitive to Loran-C measurement error than to double-star measurement error.

22 Theoretical analysis indicates that the revised method can effectively decrease the temperature measurement error.

23 The main factors determining the measurement accuracy are respectively discussed based on the analyses of the measurement error of angular displacement.

24 The voltage measurement circuit with photoelectric relay was analyzed through the experiment, the result exhibited that the photoelectric relay was the main factor of causing the measurement error.

25 Conclusion This well head steam quality sampling unit works with minor measurement error.

26 The results show that the method can effectively reduce angular measurement error of the monopulse radar when tracking noise jammer.

27 The mechanical process is analyzed by using method of mechanical impedance and the measurement error equations are given.

28 The non-touch measurement on size error and shape error within one system is realized and the reasons of measurement error are analyzed.

29 The lithogeochemical heterogeneity in rocks are mainly due to measurement error, closure and petrological controls.

30 A curve of sine approximate error in angle measure is devised, a mathematical model of the measurement error is presented.

31 When it was chose B(blue) and G(green) as the two color calibration, the temperature measurement system had good linear response, good sensitivity, and little temperature measurement error.

32 For a satellite attitude determination system based on star sensors. It is important to make an exact model of star sensors measurement error.

33 In other words, people with normal hearing can produce spurious responses during a hearing test that look like a mild hearing loss, a result consistent with measurement error.

34 There exits a compound error problem in the electrical measurement , which is composed of PT synthetic error, CT synthetic error, electrical energy measurement error and secondary potential of PT.

35 Different from the common inverse time characteristic, this model conforms to the load actual operating law and the protection request, and takes the analysis of measurement error into consideration.

36 External proficiency testing also provides an ongoing comparison of inter - laboratory measurement error.

37 Aimed at the characteristic of bigger single point location error, a new measuring method using two points relative location measurement to reduce location measurement error was put forward.

38 According to usage environment, temperature measurement error of automatic thermograph was studied in different environment temperatures.

39 This study aims to compare the anthropometric data to realize the ethnic difference and evaluate the measurement error of the whole body scanning system.

40 Through polar coordinate method error calculus demonstrated that the setting-out point error is mainly caused by angle measurement error.

41 How this measurement error can be checked and corrected are briefly discussed.

42 On the basis of analyzing the operation principle of laser particle sizer(), we introduce a method of delamination which is employed to revise the measurement error by high concentration suspension.

43 The result has good re productivity and little measurement error.

44 According the error processing criterion, if the measurement error is 3 times larger than the standard error, the singular data can be deleted and substituted with arithmetic average value.

45 Experimental results show that the developed wet gas flowrate measurement model is available and the flowrate measurement error is within about 5%.

46 There is dynamic measurement error of electric power because of inherent inertia of the electric dynamometer.

47 The retardation of the Fresnel rhomb phase retarder was measured with the measurement error less than 0.3%.