1. During that 10 msec no current is drawn.

2. So, perhaps 50 msec ping will be ideal, 100 will still be acceptable, and as you go over that , you'll probably need to stay away from circumstances where you'll need fast reflexes.

3. Waited 11 msec for asset ' cinematic ' of type 'material'.

4. For Kikusui electronic load, there is a 10 msec delay from applying input voltage to drawing presetted current.

5. The slight difference in response time of 1 msec would not be perceivable, and is likely due to measurement variability.

6. SMC protocol was designed to replace MSEC protocol suite which has been widely deployed in multi-party communication scenario.

7. The work will be performed by ManTech Systems Engineering Corporation (MSEC), a wholly owned subsidiary of ManTech, headquartered in Lexington Park,[/msec.html] Md.

8. The ability of SDH to support 50- msec switching to backup paths, combined with extensive performance monitoring features for high quality transport.

9. Moreover, GE images with a very short TE (ca. 12 msec) may be used to produce high signal corresponding to flow, so-called flow-enhanced images.

10. At a distance of about 50 cm (0.5 m) the time delay for a signal reaching first one and then the other microphone from the side is approximately 1.5 msec (1 to 2 msec).

11. Encased in 74 mm 1/16 DIN short casing with NEMA 4X/IP66 waterproof and dustproof protection, Model FB100 offers selectable sampling time of 50, 100, or 250 msec .

12. The maximum magnitude of the startle reflex, in terms of whole body movement, that occurred during a 40 msec window beginning just prior to the presentation of the startle noise, was recorded.

13. By using the designed identification system, the update of the identified parameters of a linear second order system can be accomplished in 2.5 msec .

14. If the voltage is removed for more than 90 msec, the electronic will start to sink current 10 msec after the application of voltage as usual.

15. Response time for a step change is approximately 500 msec , which is acceptable for most current-loop control devices, such as control valves.

16. Sampling time for all digital and analog signals is 10 msec .

17. Experiment 2 showed that the timing accuracy of different keyboards varied from 1 to about 40 msec. Those PS2 keyboards had poor performance, especially.