1. The inlet pipe of each pump has a magnetic filter to absorb metal substance in oil.

2. The inlet pipe penetration into the vessel, the pressure drop across any block valves used. upstream of the venting device, and the inlet piping must be considered when determining these losses.

3. The water inlet pipe of the water jacket is connected with an automatic water replenishing tank outside the furnace.

4. The screw thread is arranged at the water inlet pipe, drainpipe and the water outlet pipe.

5. The inlet pipe of each pump has an inlet filter to protect pump from being damaged by big particles.

6. Then, the water is injected through the water inlet pipe (6). Stemming (11) is eliminated by the permeation of the water and the self pressure of tap water.

7. The filter tube is fit over an oil inlet pipe of the oil channel and the nozzles of the oil channel are communicated with an automobile oil injection nozzle by a nozzle divider.

8. The casing is respectively connected with a water inlet pipe and a water outlet pipe,[] and the front seal head is respectively equipped with a grape juice inlet and a grape juice outlet.

9. Wave resonance and energy loss of inlet pipe were analyzed first and one dimension numerical simulation of unsteady flow was studied.

10. Pump inlet pipe diameter changes when level, should choose eccentric different-diameter pipe.

11. All new ballvalves should be provided with a servicing valve on the inlet pipe.

12. An inner spiral has also been added to deflect swirling grain from the cyclone's inlet pipe, minimising wear.

13. In general, this method can be applied to gas vibrations in the inlet pipe system of an Internal combustion Engine or a Compressor.

14. A method "extracting the resonance peak of freqency spectzrum" is applied in dynamic mathematical modelling a strain gage pressure transducer with inlet pipe and pressure chamber.

15. The complex pump body in the pump is fabricated by that a pump body, a whorl casing, a liquid inlet pipe, and a cover plate are assembled.

16. A superconductive airflow chamber and a water inlet chamber are arranged in the superconductive chamber in parallel, and the water inlet chamber is provided with drain slots and a water inlet pipe.

17. The composition of main air blower set of catalytic cracking unit. The different types of blower and its different inlet pipe system arrangement were recommended.

18. The water-plugging device of large diameter tube used for water-finding comprises a water-plugging gas bag arranged circulating the frame, an inlet pipe or a discharge pipe is arranged in the frame.

19. The reason for the accidental failure lies in the unduely designed inlet pipe to the tank.

20. The submerged aerator is composed of submerged pump, mixing room, the seat, inlet pipe, muffle and so on.

21. For EFI (Electronic Fuel Injection) system used in FSAE car, the pressure loss in air inlet pipe results in measured value of the intake quantity being much more than actual value.