1 Beat the mixture for two minutes at low speed .

2 Beat 2 minutes on low speed.

3 Beat 1 minute on low speed.

4 Around 30 bikes were crashed, most at low speed.

5 On low speed, gently blend in flour, cup at a time.

6 If it has a fairly low speed, gravity will eventually stop the rocket and it will start falling back.

7 With an electric mixer, beat at low speed until moistened and then at medium speed for 3 minutes.

8 The car came towards them at low speed, and then someone leaned out the back window and started shooting.

9 Beat 1 minute on low speed. Stir in enough additional flour to make soft dough.

10 Beat 2 minutes on low speed. Add 1 cup additional flour and yeast.

11 Beat on low speed with electric mixer for 30 seconds.

12 In an electric mixer, at low speed, soften the cream cheese.

13 DOES THE WIPER MOTOR OPERATE IN LOW SPEED?

14 Armature reaction of bldcm in low speed influences torque-producing.

15 Newtonian mechanics is correct in low speed inertial system.

16 Aiming at heavy duty and low speed gear transmission, Zheng Zhou Research Institute of Mechanical Engineering puts forwards ZY-1 case-hardened double-circular-arc gear.

17 Stable: Only one low speed running for gearless traction machine, it will ensure the long time stable running.

18 But its low speed range is easy affected by the stator voltage error, especially when the motor is connected to the voltage inverter.

19 Pulsating magnetic field PM low speed synchronous motor is a type of PMSM with novel structure.

20 Detailed flow field measurements were conducted in a low speed wind tunnel for both original and modified LGV's which are used in turbofan engines.

21 Place all the ingredients in the large bowl of an electric mixer and mix on low speed until combined.

22 Use a hand drill or an electric drill on very low speed.

23 The dowel is gripped in a drill, and run at low speed(), with a little pressure.

24 Put in bowl and mash with masher or electric beater on low speed.

25 You'll save money on petrol if you drive your car at low speed.

26 The utility model solves the problems that the two-wheel bicycle is in bad stability and can not ride in low speed, the operation is tight, and the safety is bad.

27 This type of bearing is suitable for middle or low speed with heavy load condition. It is widely used for engineering machinery, vehicle, steel and iron and takeup machinery.

28 To investigate the aerodynamic performance effects of front guide blade to test cascade, low speed wind tunnel experiments were carried out on the two LGV cascades with and without front guide blade.

29 Load of gear box can be decided by measuring of low speed shaft contort.

30 A high pressurized design method of slipper pairs of a new type camshaft connecting-rod low speed high torque motor was put forward.

31 The ideal method is low speed centrifugalization and dilution medium .

32 To solve the problems of low speed and precision of micropipette movement, a novel digital piercing and withdrawing micropipette device (DPWMD) was presented for microinjection.

33 Effective speed identification in low speed and standstill area is an important item for speed sensorless control of asynchronous motor.

34 The practices show that homomorphic filtering technology is effective to extract low frequency fault information in fault diagnosis of low speed and heavy-duty gear.

35 The working features and frequency restrictions of SFC starting under two operation modes are analyzed, which are pulse switching mode with low speed and synchronous mode with high speed.

36 Originally built for use with low speed power take-off drives, this pump is particularly suitable where minimal space is available, and feed lines must be simplified, by necessity.

37 But it is restricted that modem has a low speed and a high error bit rate.

38 It has the feature of low speed, anti-corrosion and prevention of leakage.

39 Computer memory play, and set various broadcast modes such as time play, double frequency scanning, low speed, stop motion, paragraphs repeat, etc.

40 XXX Antenna Tracking System is a low speed, high tracking precision servo system, whose key is how to realize high precision motive tracking.

41 Running at low speed for too long might carbonize the spark plug.

42 When gas percolates at a low speed in medium with low permeability, slippage effect will occur.

43 It is similar to the case under low speed that the tangent ogival projectile and larger ration of length to diameter can enhance the penetration, but the damage on the concrete is less serious.

43 is a online sentence dictionary, on which you can find nice sentences for a large number of words.

44 Based on the current situation of Chinese traffic and transportation, this paper analyzes the actual demand of Medium and Low Speed Meglev rail technology in China.

45 Applied to all the steam valves, steamer universal valves, expanded knurl, the easy crystallization pumps and valves with high temperature and low speed.

46 The tests results indicate that (H-shaped) booms without taking any measures have galloping performance in low speed wind.

47 The simulation results showed that the performances have been improved by the compensation method based on low-pass filter in low speed in DTC system, confirming the validity of the method.

48 Good toughness and wear resistance, suitable for low speed cutting allowing a big rake angle, ensuring the sharpness of the edges, bearing a heavy cutting force and achieving good surface finish.

49 The accuracy and realability of the numerical software used to simulate the flow field of subsonic compressor is verified by the experiment data of a certain low speed two stage repeated compressor.

50 A sensorless control strategy for a salient-pole PMSM using saliency tracking at low speed and back EMF at high speed is presented to obtain the rotor speed and position.

51 Due to their specific kinematic behaviour, cylindrical roller thrust bearings are only suitable for low speed applications only.

52 Spheroidal austenite and acicular austenite can be seen during the austenitizing courses at low speed.

53 Direct-driven PMSG works at low speed and its size is generally big.

54 Operation of the low speed of credit fund, low benefit, already caused major company loss.

55 Low Speed Control Processor?

56 Exterior flow field measurement above smooth and different riblet surfaces was carried out in a low speed wind tunnel by means of hot-wire anemometry.

57 For high or low speed rotation and reciprocating motion. Sealed mediums - mineral oil, water, etc.

58 The SL - II's low speed handling was also a welcome surprise.

59 Sift together the plain flour, cornstarch and cocoa powder together into a separate bowl. Add half of the flour mixture to the butter mixture and beat on low speed until just combined.

60 In the servo control system , traveling - wave ultrasonic motor ( TUSM ) need work in low speed.

61 But recently, the development of it has been slowed down because of problems, such as low speed, low level of service. So the bus traffic cannot develop swimmingly.

62 The only thing that hindered the Fujin's low speed performance was the handlebar shape.

63 The reason and overcome measure of the orientation force and the moment fluctuation of low speed of the Permanent magnetic Linear synchronous Motor are introduced in this paper.

64 The quantitative analysis shows that the numerical simulation cases are different from the experiment results in the place of the transition point, film thickness at low speed area and the zero point.

65 This article introduces an air bubble method for low speed flow visualization in water tunnel.

66 Keys are used for working model, AIS and - low speed controlling, functions switching , alarm silence for excavators.

67 These services range from simple, low speed data links that work over the public telephone network to sophisticated high-speed data services that are ideally suited to the interconnection of LANs.

68 The vessel is to be single fixed pitch propeller propulsion with one (1) low speed diesel engine located aft.

69 The simulation proves indicates that the curve power characteristic can satisfy the requirement of turning fixedly, facility at low speed and the road sense at high speed.

70 Since the BP algorithm has the low speed in studying and can'tensure reach the whole minimum.

71 It is a low speed serial bus protacal, Lin sub-bus is primarily intended for modules like window, door, switch panel and light etc.

72 Plate count method, method dilution method, low speed centrifugalization and dilution medium were taken the verification of methodology.

73 Bidirectional thrust ball bearing can be used for low speed application.

74 The Direct Torque Control (DTC) with round flux trace control has high accuracy and is normally used in low speed.

75 Servo control system is not easily smooth as low speed follow - up.

76 The subsonic vehicle has the characteristics of low speed, longtime flight and low dynamics.

77 The cyclic variation of the combustion pressure in the cylinder of a four-valve gasoline engine was analyzed at low speed and light load with the CB-466 combustion analyzer on the engine test-bed.

78 Used at low speed with a soft muslin buffing wheel, brings up a high gloss on polymer clay pieces.

79 Seabed mining vehicle is hydraulic drive, low speed and tracked alongs - shaped path.

80 M06 High Bright Kaolin has features of high brightness and minor particle. It is suitable to use as dope for high class coating paper and top coat when it is coated at medium or low speed.

81 The formation of "low pressure closed circumfluence region" and the entrainment of vortexes are the main reasons for vectoring a low speed jet.

82 According to the application in the low speed voice encoding device, its operation modes and configuration are introduced in this paper.

83 Firstly, the advantages of low speed high torque motor ere introduced.

84 The torque ripple arosed by the slot effect in PM motor are more significant in the low speed hub motor for electric vehicle use.

85 At the low oil volume fraction and low speed, the oil volume fraction increases rapidly with coordinate x to form the oil pool in the region close to the Hertzian contact area.

86 Gradually add the sifted powdered sugar and beat, on low speed, until fully incorporated and smooth.

87 The low speed efficiency of pump-control-motor speed governing system with inverter is obviously reduced when setting low frequency compensation.

88 Appropriate pitch curve designing is a key of regularly working for non-circular planetary gear mechanism with variable center distance which can be used in low speed high torque hydraulic motor.

89 The flow field of the wing tip vortex, which shed from a rectangular wing, is surveyed by a seven holes probe in a low speed wind tunnel.

90 Three methods of improving low speed performance addition of vibration signals, nonlinear lead network and variable-gain amplifier are emphatically analyzed.

91 Snake-shaped beater:suitable for flour mixing and food with hight glutinosity . Capacity and water added is 45%-50% of the flour weight. Select low speed mode.

92 In the high-end area such as bank and e-business, the application of RSA algorithm meets the bottle-neck that its low speed does not satisfy high throughput real-time signature and authentication.

93 Position and speed are obtained by an observer using a voltage and an inductance motor model together with test signal injection at low speed.

94 Micromotor has become a hot topic which more and more scholars study on due to the demands of motor miniaturization, low speed and high precision etc.

95 In order to develop U-joint spider bearings suitably used for heavy load and low speed motor vehicles, a steel back polyoxymethylene selfoiling compound material has been developed.

96 The results indicate that the proposed controller is capable of maintaining the torque switching frequency constant and reducing the torque ripple, particularly at low speed.

97 Using single chip as the core, the paper studies a way to realize multiplex low speed data serial transmission, presents hardware connection chart, expounds work principle and software design idea.

98 More turns of winding is needed to produce enough voltage because the DPMG rotates at low speed, but the armature reaction is high at same time.

99 Applanation structure are used in torque motor to get a high output torque and low speed characteristic. The ratio between armature magnet core length and outside diameter just little.

100 U-I flux linkage model can be set exactly at low speed for considering the effects of temperature to stator resistance.

101 The peripheral bus that conform the PVCI standard usually used to connect IPs with low speed and low data width.

102 As for bang-bang control, DTC has poor performance in low speed range. ISR and DSFO can not completely avoid the dependence upon rotor parameters.

103 The phenomena such as low speed friction, system steady-state error, limit cycle oscillation, and static-slip caused by the frictions exists in gun control system of tanks.

103 is a online sentence dictionary, on which you can find nice sentences for a large number of words.

104 Firstly, the advantages of low speed high torque motor were introduced.

105 Purpose: Audio frequency power amplifier and low speed switching applications.

106 Influence of the wake impact effect on the flow field and its average performance in a low speed axial-flow compressor was investigated by using external acoustic excitations.

107 This article presents the principles and some problems which should be noticed in a float bed and low speed counter-current softener.

108 In order to satisfy the operation requirement of the rated thrust of the propeller, the propulsion motor performs only in rated torque on the low speed, so the motor power is low.

109 This new hydraulic cylinder may also provide reference for other single-acting cylinders with low speed.

110 The present work investigates the possibility of using the biplane configurations to improve the aerodynamic characteristics of fixed-wing MAV through low speed wind tunnel experiments.

111 The anti-rolling tank is one of the most popular used stabilizing equipments, and it especially fits for ships working at zero speed or low speed.

112 It is applied for the special line with steep gradient and small radius of curvature. This tourist car which runs with light load and low speed has high safe ty performance.

113 The low speed machine usually has a short and fat structure in order to use effectively the rotating speed of the rotor, as contrasted with the long and thin structure of the high speed machine.

114 Aimed at the shortcomings of coalface passing through fault as low speed, low efficiency and low-quality coal and so on, a new technique was suggested.

115 The F-117 Nighthawk "stealth fighter" is another plane which isn't prone to vapor, but it still put on a great display in spite of its relatively low speed.

116 Level restoration pass-transistor logic is proposed for low speed cell while dynamic transmission gate logic for high speed cell.