1, This is the power of the finite element method.

2, The application of finite element method in torsion calculating of deep hole drill is introduced.

3, By the use of a finite element method the authors have calculated the stress and rigidity of a main reduction gear box case body for a certain type of cement mill.

4, A 1D finite element method in time domain is developed, where the wave motion of free field in elastic half-space by SH wave oblique incidence is simulated.

5, Vibration analysis of composite laminated plates (CLP) using finite element method and structural acoustic analysis using Rayleigh integral were carried out.

6, The calculated results by using finite element method are in good conformity with the corresponding data measured by using laser Doppler anemometry (LDA).

7, Based on the finite element method, the characteristic function of structural load effects is derived in this paper.

8, The parallel finite element method using domain decomposition technique is adopted to the distributed parallel environment of workstation cluster.

9, The main methods are calculus of variations, finite element method and boundary element method.

10, From interval arithmetic, an analytical method of interval finite element of uncertain structure is presented by combining interval analysis with the finite element method.

11, The piston of the L207E diesel engine has been evaluated with finite element method based on an"equivalent stiffness" modified priciple in this paper.

12, Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed.

13, In order to improve the office paper feeder design and minimize paper jam fault in running office equipment, paper mechanical properties are studied by means of nonlinear finite element method.

14, An effective method is given for roll design to avoid major defects via finite element method (FEM) simulation using a booting model.

15, Relationship between the linear acceleration and the resonant frequency of the sensing unit was deduced and the finite element method was used to simulate the correctness of the theory.

16, The front moulding board of special type injection machine is analyzed by finite element method. The results provide useful data for the optimization design of moulding board.

17, The nonlinear stability of the space frame-composite laminate plate combined structures is studied by nonlinear finite element method.

18, This paper presents the computational modeling of milling process. A new method is proposed to predict the workpiece deformation based on the super-element technique of finite element method.

19, The stress analytic method of arch dam covers pure arch method, arch beam sharing method, finite element method, calculating method of shell theory and structural model test method.

20, In this paper, the model of a ship-born electronic display console is established using finite element method.

21, From the mathematical formulation of effective thermal conductivity for periodic microstructures, the effective conductivity matrix is evaluated by means of the finite element method.

22, Numerical emulation experimentations are carried out on the bearing performances of the single dry-cement jet mixing pile composite foundation by means of the finite element method (FEM).

23, We studied the model problem of controlled "dead zone" in the bone remodeling simulation in which combination of bone remodelling with finite element method was adopted.

24, The transonic flow field around NACA 0012 airfoil is calculated by finite element method from pressure minimum integration,[http:///finite element method.html] full potential equation being used.

25, In this dissertation, the probabilistic seismic response of liquefiable foundations and earth dams was carried out via stochastic finite element method under nonstationary seismic loadings.

26, With the increase of discount factor, the rock and soil reaches the limit state gradually. The finite element method agrees with the traditional method.

27, The stress distribution of toroidal field D-shaped coils for the TOKMAK fusion reactor is solved by the finite element method.

28, In this paper, based on the dynamical equation of magnetic bearing-rotor system, the critical speeds of the rotor for a high speed machine by means of finite element method (FEM) are calculated.

29, According to Darcy law, the numerical model for leaching solution seepage in an efflorescent orebody is established. This model is solved by finite element method.

30, The electrophoretic mobility of a colloidal particle near the boundary is investigated in this study for various types of problems by using finite element method.

31, Based on the theory of elastodynamics, the interaction of elastic surface acoustic waves with surface-breaking defect is studied numerically by using the finite element method.

32, This paper obtains the mode of vibration of swash plate in an axial piston pump by finite element method, which is verified by experimental results. And on the basis, some discussions are carried out.

33, After all of the loads applied to the roof bolt are obtained, its stress calculation is solved by using the finite element method.

34, An analysis and calculation of the suspension system of maglev ball by finite element method(FEM) and similarity principle is presented.

35, The nonlinear and dynamic finite element method is used to analyze the anti-liquification ability of the dam and its base. As a result, the possibly liquified places are obtained.

36, Based on grid computing technology, a prototype of distributed parallel finite element method ( DPFEM ) is studied in this paper.

37, This paper describes the application of finite element method for obtaining the TE mode′s cutoff wavelength and the field pattern of symmetric quadruple-ridged rectangle waveguide.

38, A calculation programme of finite element method has been developed in order to study the behavior of excavation with sheet piling in soft clay.

39, In this paper, calculation of load performance of a 28V, 35A claw-pole alternator is presented using three dimensional finite element method with tetrahedral edge elements.

40, Based on a magnetic strain model, the basic equation of finite element method for magnetoelastic bucking analysis is derived in this paper.

41, A theory of aeroelastic stability of hingeless rotor blade in hover by using the Galerkin weighted residual finite element method is developed in this paper.

42, By the use of finite element method, the stress calculation of damageable zone was conducted by the author, and proved that the strength of that zone had no problem.

43, The temperature distribution in the diamond synthesis cell of sideward heater was investigated theoretically by finite element method (FEM).

44, In the finite element method, one of the restrictions on the approximating functions is relaxed.

45, The characteristic impedance of GTEM cell is analyzed by three - dimension finite element method.

46, On the basis of modern theories of vibration, KED analysis and finite element method, a kinetic model of piston-linkage mechanism of XN2110 diesel engine was set up by I-DEAS software of SDRC USA.

47, In this paper, the contact problems of small displacement and strain have been analysed by finite element method and incremental theory.

48, The air-gap magnetic field of a salient pole synchronous generator whose stator slot is fractional with the consideration of turn insulation is calculated by the finite element method in this paper.

49, The boundary point method has been applied to solve the problem of dam foundation seepage, and its results are compared with the results from finite element method and fissure network method.

50, A Laplace transform finite element method for solving the dynamic coupled ther-moelasic bending problems of thin plates was proposed based on the variational principle of theProbems.

51, The leakage inductance calculation of a frequency changer by using the finite element method of harmonic balance is proposed.

52, With the known displacements of boundary tissues and the force distribution, the Young's modulus is calculated by constructing the unit system and using the inverse finite element method (IFEM).

52, try its best to collect and create good sentences.

53, Based on numerical analysis of nonlinear finite element method, the strength problems of connecting thread are studied when unguided rocket launching.

54, The ground surface settlement and lateral deflection of retaining wall for deep excavations are calculated using nonlinear finite element method.

55, Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).

56, The fine scales solution in the variational multiscale finite element method, which can be acquired by analytical or numerical technique, has an important impact on the final numerical solution.

57, So the calculation and analysis on the blower rotor pan intensity are made through finite element method. It is concluded that after repair the blower can continue working safely.

58, This paper employs the finite element method to solve the eigenvalue problem on the stability of a perturbed 2D magnetohydrodynamics (MHD) model of an aluminum reduction cell.

59, The boundary problem of finite element method in solving the sound vibration of cavities with "open mouth" has been studied.

60, The different seismic responses of underground structures in liquefiable soil at different burial depths were studied using the nonlinear coupled finite element method.

61, Dynamic simulation of electromagnetic valve actuation (EVA) was conducted on a prototype EVA by using both finite element method (FEM) and lumped parameters method (LPM).

62, Numerical simulation on the process of friction disc jointing by finite element method is presented in the article.

63, Finite element method is one of computer - aided engineering CAE and has its application prospect.

64, For the first time this paper makes a systematic study about superconvergence of interpolated coefficients finite element method for many semilinear problems and obtains rather integrated results.

65, The differentiability of the initial stresses and elastic constants of the surrounding rocks of tunnels is discussed firstly from the point of view of finite element method.

66, A curved shell finite element method is presented in this paper to analyse the nonlinear stability problems of thin-walled steel members which are treated as thin shell structures.

67, Based on the original definition of slope safety factor, centrifuge loading finite element method(CLFEM) is presented by the "virtual state" of slope for the analysis of slope stability.

68, In this paper we employed the nonlinear finite element method to calculate the stress and bursting pressure of filament wound rocket motor case.

69, Based on the assumption of undrained behavior, author has proposed previously a finite element method for calculating the pore pressure and permanent deformation of saturated sands during earthquake.

70, FEM (Finite Element Method) is used to simulate the after-perforation productivity in horizontal wells and forecast productivity ratio of different perforating methods.

71, Objective Three dimensional finite element method(FEM)is suitable for the analysis of the stress and deformation of the internal fixation plate and its modified type of the centrally convex shape.

72, To minimize the cogging torque, a global optimization algorithm(zooming algorithm) and the finite element method(FEM) are combined to find the best pole arc combination.

73, The finite element method is a very effective numerical analysis method to extremely complex engineering structure.

74, A numerical approach combining with the finite element method, applied to determine stress intensity factors at the interface edge of bonded materials is proposed.

75, The technique facilitates the modeling of multilayered passive circuits using the hybrid mode matching and finite element method (MM/FEM).

76, Generally, three methods are used in form finding nowadays: the force density method, dynamic relaxation method and nonlinear finite element method.

77, The finite element method is combined with homogenization theory based on asymptotic expansion for predicting effective properties of polymer matrix composites toughened and strengthened by particles.

78, This thesis utilizes finite element method to turn round stress limited to computing method of segmenting.

79, Based on reliability theory, combined with finite element method for structure optimization, the lightweight design for the lower arm of a suspension is conducted.

80, Multivariate splines are applied widely in approximation theory, computer aided geometric design and finite element method.

81, A variational formula combining mixed finite element method with discontinuous finite element method is derived for solving the two-group neutron diffusion equation in 2D.

82, Then,[http:///finite element method.html] the article derives finite element analysis equilibrium equation and element rigidity matrix in use of nonlinear finite element method.

83, The vibration equation of laminated plates and the calculation formula of responding sensitivity of antisymmetric laminated plates by using spline finite element method are presented.

84, We regarding resistancial intensity of lopsided abrasion vitta as destruction question, applying elastoplastic finite element method to analyzed the lopsided abrasion vitta′s resistancial intensity.

85, A circular groove to circular waveguide junction is analyzed with finite element method (FEM).

86, Based on the finite element method, the maximum circumferential stress and stress intensity factor near the tip of mode I V-notch added coating are analyzed numerically.

87, In this paper the isoparametric elements for 3D magnetostatic field problems on the basis of two scalar potentials finite element method is introduced.

88, Finite element method ( FEM ) occupies an important part in Computer Aided Engineering ( CAE ) methods.

89, The equations of hydrodynamics including conduction of heat are solved numerically by using the finite element method.

90, Finite element method ( FEM ) simulation and impedance characteristic test agreed well with the calculated results.

91, The solidification process of liquid metal int he CASTEX technique was studied by FEM ( finite element method ).

92, Based on the finite element method (FEM), the negative-refraction (NR) property is demonstrated when the electromagnetic wave penetrates through free space into such SNG lamellar structure.

93, In order to unfold the final shape or modify the initial blank, a Constrained Unfolding Algorithm(CUA) based on one-step inverse FEM(Finite Element Method) is proposed.

94, Meanwhile, the transmitting voltage response of the transducers are calculated by using finite element method.

95, Based on plane section computational assumption, the constraint equations of element nodes' degree are used and the simplified finite element method is proposed.

96, The relevant theories of three-dimensions Element-free Galerkin method and Nonlinear Finite Element method are introduced in this paper.

97, Theory of finite element method and finite difference method for BFIA are briefly discussed.

98, The finite element method is combined with the natural boundary element method to study the weak solvability and Galerkin approximations of a class of semilinear exterior boundary value problems.

99, An elastoplastic analysis of plate-bending formulation which is incremental computation form of finite element method is derived by variational principle.

100, By means of fuzzy finite element method, the method for fuzzy reliability analysis of structures are put forward based on possibility theory.

101, This paper introduces the "influence line method"which combines analytical method and finite element method.

102, The Finite Element Method (FEM) is applied to numerically simulate the tidal flow in the vicinity of the river mouth of Yellow River.

103, The coefficient matrix is stored by row storage. Column storage address is also provided. Rapid storage of coefficient matrix in finite element method is then realized.

104, In the calculation of static magnetic field, the Finite Element Method (FEM) is used. The force characteristic of PMA with exciting current and without exciting current are calculated and analyzed.

105, The BEM technique for adhesive-bonded structure proves valid by comparing the stress distribution for double lap joint calculated in this paper with that calculated by finite element method.

106, To predict macroscopic effective elastic moduli of composites, a computational method is established based on micro mechanics finite element method.

107, Finite element method is used to build up element stiffness matrix and element mass matrix. After the combined total stiffness matrix and the total mass matrix are obtained.

108, Since the structure of deflection system is complicated, FEM (Finite Element Method) may be suitable to calculate the system.

109, Deformation characteristic of the Charade car hydraulic shock absorber spring valve chip is analyzed by means of finite element method.

110, The characteristic of C-type Bourdon tube is analyzed with finite element method.

111, A virtual balancing method of a flexible rotor based on rotor dynamic and finite element method is proposed in this paper to decrease the vibrations caused by mass unbalancing.

112, This paper presents dynamic structure models using Lumped Parameter Method(LPM) and Finite Element Method (FEM) respectively.

113, Using the Finite Element Method (FEM) and dislocation theory,[/finite element method.html] we simulated the asymmetric earthquake displacement field of a vertical strike-slip fault caused by laterally inhomogeneous medium.

114, The paper studied the seismic performance of steel box bridge pier and the strengthening effect of partially concrete-filled strengthening method using finite element method.

115, To validate the calculated results of the transfer matrix method, the finite element method ANSYS was used to calculate blade vibration with dry friction damper on the platform.

116, There are three main methods by far, nonlinear finite element method, idealized structural unit method and progressive collapse analysis method.

117, Computation based on the finite element method has been carried out with the computer type 709.

118, A method for the dynamics analysis is put forward, which combined the finite element method and the design wave theory including the effect of the motion of the moored structure at the fairlead point.

119, Specimens of composite wall panels in three groups are analyzed using finite element method and analyzing results are compared with the pseudo-static shear test results.

120, The transverse elastoplastic mechanical properties of fiber bundle reinforced composites were studied by using the micro mechanical model and finite element method.

121,

122,

123,

124,

125,

126,

127,

128,

129,

130,

131,

132,

133,

134,

135,

136,

137,

138,

139,

140,

141,

142,

143,

144,

145,

146,

147,

148,

149,

150,

151,

152,

153,

154,

155,

156,

157,

158,

159,

160,

161,

162,

163,

164,

165,

166,

167,

168,

169,

170,

171,

172,

172, try its best to gather and make good sentences.

173,

174,

175,

176,

177,

178,

179,

180,

181,

182,

183,

184,

185,

186,

187,

188,

189,

190,

191,

192,

193,

194,

195,

196,

197,

198,

199,

200,

201,

202,

202, is a sentence dictionary, on which you can find good sentences for a large number of words.

203,

204,

205,

206,

207,

208,

209,

210,

211,

212,

213,

214,

215,

216,

217,

218,

219,

220,

221,

222,

223,

224,

225,

226,

227,

228,

229,

230,

231,

232,

232, Wish you can benefit from our online sentence dictionary and make progress day by day!

233,

234,

235,

236,

237,

238,

239,

240,

241,

242,

243,

244,

245,

246,

247,